FOX PURMAX® SPRAYTEC FS570 is a polyurethane-based, two-component, solvent-free waterproofing membrane with crack-bridging capability that cures rapidly. Applied using specialised spray machines, this product forms a continuous, flexible waterproofing layer on horizontal and vertical surfaces without any joints.

Colour Palette

Packaging

220 kg

225 kg

TDS

Product Description

FOX PURMAX® SPRAYTEC FS570 is a polyurethane-based, two-component, solvent-free waterproofing membrane with crack-bridging capability that does not lose its flexibility over time, cures rapidly, and forms a seamless coating. Due to its very fast reaction time, it can be applied using specialised spray machines. Its application speed and rapid curing properties minimise downtime compared to conventional waterproofing products. It meets the requirements of TS EN 1504-2:2018 / Principle 1.3, 2.2, 5.1, 8.2. The product offers high mechanical and chemical resistance and can be used across a wide temperature range (-40°C / +120°C).

Advantages

Cures within seconds, walkable within minutes.
Applicable on horizontal and vertical surfaces.
Provides easy solutions in difficult details.
Seamless application — no joints or overlapping details.
Provides excellent adhesion.
Excellent chemical resistance.
Excellent mechanical resistance.
High puncture resistance.
Flexible and resistant to abrasion.
Crack-bridging capability.
Excellent adhesion to almost all surfaces (concrete, steel, aluminium, fibre, wood, foam, etc.).
Hydrophobic (water-repellent) properties.
Impermeable to liquids; suitable for continuous water contact.
100% solids, VOC- and solvent-free.
Excellent thermal resistance — the product never re-softens and retains its elasticity at low temperatures.

Property	Value
Material Composition – Component A	Polyurethane Resin
Material Composition – Component B	Polyurethane Hardener
Colour	Grey
Mixing Ratio (by weight)	100/73
Mixing Ratio (by volume)	100/70
Elongation at Break (DIN EN ISO 527)	%400
Tensile Strength (DIN 53504)	≥10 N/mm²
Tear Strength (DIN 53504)	≥18 N/mm²
Gel Time (hand mixing)	15-20 seconds
Shore A Hardness (DIN 5350, 28 days)	85
Shore D Hardness (DIN 5350, 28 days)	34
Carbon Dioxide Permeability	Sd>50 m.
Capillary Water Absorption	W<0,1 kg/(m²·h⁰·⁵)
Substrate Temperature for Application	+10°C / +30°C
Maximum Relative Air Humidity for Application	%85
Service Temperature	-40°C / +120°C (Short-term +250°C)
Compliance Standard	TS EN 1504-2:2018 / Principle 1.3, 2.2, 5.1, 8.2
Shelf Life	6 months (from date of manufacture, stored at +15°C/+25°C)

Usage Areas

On UV-exposed terraces in combination with FOX PURMAX® TOPCOAT or FOX PURMAX® POLYUREA TOPCOAT
On roofs, terraces, balconies and all wet areas
In swimming pools and ornamental ponds
In aircraft hangars, tunnels and warehouses
For car park waterproofing and coatings
On water supply lines and channels
In underground water tanks and collection tanks
In prefabricated structures
In steel structures
For waterproofing applications beneath hot asphalt
In roof gutters
For planter box waterproofing
For positive-side waterproofing of foundations and retaining walls

Application Steps

1
Surface Preparation – Concrete Surfaces
Oil, grease, fuel and paraffin residues must be removed; the surface must be completely free of release agents, cement residues, loose particles and cured membranes. Surface defects should be repaired with FOX EPOMORTAR FC510 or FOX FASTMORTAR FC245, and surface cracks should be filled with FOX PURSEAL PS600 polyurethane mastic.
2
Surface Preparation – Asphalt Surfaces
The asphalt surface must be cleaned with a water jet. For applications subject to vehicle traffic, the load-bearing capacity of the asphalt must be suitable for the loads in use. The surface must be shot-blasted to expose at least 60% of the aggregates.
3
Surface Preparation – Bitumen Surfaces
Loose parts on the bitumen surface must be removed, blisters opened and dried. Main cracks must be opened, repaired and taped over.
4
Surface Preparation – Plywood / OSB Surfaces
Ensure that the panels are correctly installed; all joints must be cleaned and taped with appropriate tape.
5
Surface Preparation – Iron/Steel Surfaces
Surfaces must be shot-blasted to SA 2.5 quality and cleaned prior to primer application.
6
Priming
Surfaces to receive FOX PURMAX® SPRAYTEC FS570 must be primed in advance with a primer appropriate to the primer selection table. Substrate temperature must be a minimum of +8°C. On standard reinforced concrete surfaces, Alternative 1 (FOX EPOTHANE® PRIMER or FOX EPOTHANE® PRIMER HB + silica sand broadcast + FOX PURMAX® PRIMER 1K transition primer) or Alternative 2 (impregnation primer + levelling primer) may be applied. FOX EPOTHANE® PRIMER WA must be used on steel, galvanised steel and aluminium surfaces.
7
Main Coating Application
FOX PURMAX® SPRAYTEC FS570 must be applied using specialised spray machines by certified applicator dealers authorised by FOX BAU PROFESSIONAL Technical Service. Under normal conditions, a consumption of 1.8–2.2 kg/m² yields a thickness of approximately 2.0–2.2 mm.
8
Topcoat (UV Protection)
FOX PURMAX® SPRAYTEC FS570 does not have sufficient UV resistance. On surfaces exposed to UV, FOX PURMAX® POLYUREA TOPCOAT or FOX PURMAX® TOPCOAT must be applied using a roller or airless spray machine.
9
Equipment Cleaning
Tools and equipment must be cleaned with solvent immediately after application. Cured product can only be removed from surfaces by mechanical means.

Critical

Concrete surfaces must be at least 3 weeks old prior to application. A vapour barrier layer must be created on slabs resting on soil.

Critical

Surface moisture content must be below 4%. There must be no rising moisture according to ASTM (polyethylene sheet test).

Critical

Ambient and surface temperature must be at least -5°C and at most +40°C. Substrate temperature must be a minimum of +8°C.

Critical

Relative air humidity must not exceed 85%.

Critical

FOX PURMAX® SPRAYTEC FS570 components A and B are ready-to-use products. No solvents or similar substances should be added during application.

Critical

FOX PURMAX® SPRAYTEC FS570 does not have sufficient UV resistance. On surfaces exposed to UV, FOX PURMAX® POLYUREA TOPCOAT or FOX PURMAX® TOPCOAT must be applied.

Critical

Surfaces to be coated must be primed with a primer appropriate to the primer selection table.

Important

Materials to be used should be brought to the application site 1–2 days in advance and allowed to acclimatise to ambient conditions.

Important

Rain, dust, wind, animals and insects must be prevented from coming into contact with the coating while it is still fresh.

Important

Opened packages must be stored under appropriate conditions and used within 1 week.

Important

The product must be stored between +15°C and +25°C, away from direct sunlight, in a cool and dry environment. Shelf life is 6 months from the date of manufacture.

Critical

Approaching storage and application areas with open flames is dangerous; areas must be ventilated.

Critical

During application, appropriate work clothing, protective gloves, goggles and a mask must be worn in accordance with occupational health and safety regulations. Avoid contact with skin and eyes; in case of contact, wash thoroughly with plenty of water and soap. If swallowed, seek medical attention immediately.

Information

Consumption figures are given for ideal conditions assuming an ambient and surface temperature of 20°C. Actual consumption may vary depending on surface texture; it should be noted that consumption will increase on uneven surfaces.

Information

The technical values above are given for +23°C and 50% relative humidity. Higher temperatures shorten the time; lower temperatures extend it.

Information

Used packaging must be stored in a manner that prevents reuse.

Related Products

OUR PRINCIPLES FOR PROCESSING PERSONAL DATA

All personal data processed by our Company is processed only in accordance with the procedures and principles laid down in the Law and in other laws. Pursuant to Article 4 of the KVKK, the basic principles we observe when processing your personal data are as follows:

Being processed lawfully and in accordance with the rules of good faith.
Being accurate and, where necessary, up to date.
Being processed for specific, explicit and legitimate purposes.
Being relevant, limited and proportionate to the purposes for which they are processed.
Being retained for the period stipulated in the relevant legislation or required for the purpose for which they are processed.

CATEGORIES OF DATA SUBJECTS

A separate policy applies to the processing of the personal data of our employees (including interns and subcontractor employees) whose personal data are processed by our Company. Data subjects other than employees, such as customers, potential customers, visitors, job candidates/interns and the employees, shareholders and officers of the institutions we cooperate with, may also address their requests to our Company under the KVKK.

PURPOSE OF PROCESSING AND TRANSFERRING PERSONAL DATA

Our Company processes personal data only for the purposes and under the conditions set out in the personal data processing conditions specified in Article 5, paragraph 2 and Article 6, paragraph 3 of Law No. 6698 on the Protection of Personal Data. Personal data may be processed where at least one of the items listed below is present:

The existence of the explicit consent of the data subject,
Being expressly provided for by law,
Being necessary for the protection of the life or physical integrity of the person himself or herself or of another person, where that person is unable to give consent due to actual impossibility or whose consent is not deemed legally valid,
Being necessary to process the personal data of the parties to a contract, provided that it is directly related to the conclusion or performance of that contract,
Being mandatory for the data controller to fulfil its legal obligation,
Having been made public by the data subject,
Being mandatory for the establishment, exercise or protection of a right,
Being mandatory for the legitimate interests of the data controller, provided that it does not harm the fundamental rights and freedoms of the data subject.

Under the conditions stated above, our Company may process personal data for the following purposes:

Evaluating potential suppliers/business partners,
Establishing and managing customer relations,
Conducting and concluding the contract process with our suppliers/business partners,
Conducting direct marketing processes,
Communication and support (upon your request),
Compliance with legal obligations,
Protecting the interests of the Company and ensuring its security,
Planning and carrying out the Company's commercial activities,
Reporting and auditing,
Protection of rights and interests.

We share your Personal Data with other parties, including professional advisers such as those listed below:

We share your personal data and your special categories of personal data, within the framework of legal grounds and your consent and within the scope of the personal data processing purposes stated above, with public institutions and organisations, banks, insurance companies, auditors, lawyers, accountants, other external professional advisers, the Joint Health and Safety Unit for the purpose of fulfilling occupational health and safety obligations, law enforcement authorities in line with our legal obligations, domestic and foreign service providers from which we receive services within the scope of marketing activities where consent has been given, and our contracted workplace physician.

WHEN DO WE COLLECT PERSONAL DATA ABOUT YOU?

We collect your personal data in the following cases:

When you visit our Company, or purchase or use our products and services,
If you are a natural or legal person purchasing goods and services from our Company,
When you sell us goods or provide us with services,
When you choose to receive our marketing communications,
When you contact us through our website, e-mail, social media platforms, other online channels or by telephone,
When you take part in our company events, social responsibility projects and organisations,
When you contact us for any purpose as a potential customer, supplier, business partner or subcontractor,
If you have applied for a job with our Company in any way or have made your CV and related information available for our Company's review.

We will process the personal data we obtain in the above cases only in accordance with this Notice.

WHICH OF YOUR PERSONAL DATA DO WE PROCESS?

Our personal data processing methods operate through our website, by telephone or e-mail, through electronic applications specific to our customers, through your participation in our business events and surveys, or through your interaction with us in any other way. In this context, the categories of personal data we process about you are as follows:

Identity information
Contact information
Images and/or videos that may identify you
Financial data
Any other information you decide to share with our Company of your own accord
Automatically collected electronic data
Legal transaction and compliance information
Corporate customer/Supplier data
Incident management and security information
Personal data collected from other sources

ON WHICH LEGAL GROUNDS DO WE PROCESS YOUR PERSONAL DATA?

Personal data is collected, used, recorded, stored and processed by our Company by providing data subjects with clear and comprehensible written information and, where necessary, obtaining their explicit consent, lawfully and in accordance with the rules of good faith, in a manner connected with and limited to the legitimate purpose clearly stated above, and within the framework of the principle of proportionality.

We process your personal data in line with the following legal grounds, which are set out in Article 5 of the KVKK and also appear under the heading "Purpose of Processing and Transferring Personal Data" of this policy, in particular the Turkish Commercial Code No. 6102, the Turkish Code of Obligations No. 6098, the Tax Procedure Law No. 213 and electronic commerce legislation:

The existence of the explicit consent of the data subject,
Being expressly provided for by law,
Being necessary for the protection of the life or physical integrity of the person himself or herself or of another person, where that person is unable to give consent due to actual impossibility or whose consent is not deemed legally valid,
Being necessary to process the personal data of the parties to a contract, provided that it is directly related to the conclusion or performance of that contract,
Being mandatory for the data controller to fulfil its legal obligation,
Having been made public by the data subject,
Being mandatory for the establishment, exercise or protection of a right,
Being mandatory for the legitimate interests of the data controller, provided that it does not harm the fundamental rights and freedoms of the data subject.

Where your Personal Data is processed on the basis of explicit consent, we would like to point out that if you withdraw your explicit consent, you will be removed from the commercial membership programme for which the processing based on that explicit consent is necessary, and that as of the relevant date you will no longer be able to benefit from the advantages you enjoyed through such processing.

RETENTION AND DESTRUCTION PERIODS FOR PERSONAL DATA

Your personal data will be stored for the retention periods specified in the relevant legislation or for as long as the processing purposes mentioned above require. At the end of this period, the data will be deleted, destroyed or anonymised in full compliance with the KVKK. In this context, a Personal Data Retention and Destruction Policy and the related procedures have been prepared and are applied.

HOW DO WE PROTECT YOUR PERSONAL DATA?

In order to protect your personal data and to prevent unlawful access to it, our Company takes the necessary administrative and technical measures in line with the Personal Data Security Guide published by the Personal Data Protection Authority, draws up internal procedures, prepares disclosure and explicit consent texts and, pursuant to Article 12/3 of the KVKK, carries out, or has carried out through external services, the audits necessary to ensure the implementation of the provisions of the KVKK.

WHAT ARE YOUR RIGHTS REGARDING YOUR PERSONAL DATA?

Pursuant to Article 11 of the KVKK, everyone has the following rights concerning themselves by applying to the data controller:

To learn whether personal data is processed,
To request information if personal data has been processed,
To learn the purpose of processing personal data and whether it is used in accordance with that purpose,
To know the third parties to whom personal data is transferred in Turkey or abroad,
To request the correction of personal data if it has been processed incompletely or incorrectly,
To request the deletion or destruction of personal data within the framework of the conditions set out in Article 7 of the KVKK,
To request that the operations carried out pursuant to subparagraphs (d) and (e) be notified to the third parties to whom the personal data has been transferred,
To object to a result arising against the person themselves through the analysis of the processed data exclusively by automated systems,
To request compensation for the damage suffered in the event of damage due to the unlawful processing of personal data.

TO MAKE A REQUEST UNDER THE PERSONAL DATA PROTECTION LAW

To obtain more detailed information about your Personal Data, you can access the information request application form from our company's website at https://www.foxbau.com/ and from the address Organize Sanayi Bölgesi 1. Kısım 7. Cadde No:6 Döşemealtı – Antalya / TÜRKİYE in person.

So that we can respond to your requests regarding your Personal Data as quickly as possible, your requests and questions must be submitted clearly, comprehensibly and with a specific date.

FOX PURMAX® SPRAYTEC FS570

Product Description

Advantages

Usage Areas

Application Steps

Surface Preparation – Concrete Surfaces

Surface Preparation – Asphalt Surfaces

Surface Preparation – Bitumen Surfaces

Surface Preparation – Plywood / OSB Surfaces

Surface Preparation – Iron/Steel Surfaces

Priming

Main Coating Application

Topcoat (UV Protection)

Equipment Cleaning

Related Products