FOX WATERPROF® FS100 is a single-component, ready-to-use elastic waterproofing material based on acrylic-elastomeric resin, with UV resistance. It complies with TS EN 1504-2 Principles 1.3, 2.2 and 8.2, and delivers reliable waterproofing performance in roof, terrace, gutter and facade applications.
Colour Palette
Packaging
4 kg
20 kg
Product Description
FOX WATERPROF® FS100 is a single-component, ready-to-use elastic waterproofing material based on modified acrylic-elastomeric resin. Thanks to its UV-resistant structure, it provides long-term waterproofing on roofs, terraces, balconies, gutters, chimney edges and building facades.
Advantages
- Single-component, ready to use.
- Easily applied with a brush.
- Forms no joints.
- Adheres to all types of surfaces.
- UV resistant.
- Maintains permanent elasticity.
- Provides high adhesion.
- Can be tinted with paste pigments.
- Paintable.
- Solvent-free.
- Resistant to freeze-thaw cycles.
Usage Areas
- Outdoor applications, vertical and horizontal
- Sloped terrace roofs
- Balconies
- Drip edges, channels and gutters
- Chimney edges
- Waterproofing of eaves, gutters and drains
- Concrete, zinc and precast gutters
- Building facades
Application Steps
- 1
Surface Preparation
The surface to be treated must be sound, free from all oils, grease, rust, paraffin, paint and bitumen residues that could impair adhesion, with all loose particles removed and dry. Newly plastered (lime-free) and reinforced concrete surfaces must be allowed to complete a 28-day curing period. Surface irregularities on uneven substrates must be repaired with FOX MORTAR FC188 T, and a 4 cm chamfer must be applied to corners and edges. Care must be taken to prevent water ponding on the waterproofed surface. Deep cracks must be filled with FOX PURSEAL PS600.
- 2
Mixing
FOX WATERPROF® FS100 must be mixed for 3–5 minutes using an electric mixer at 400–600 rpm with a suitable mixing paddle.
- 3
Priming
A primer prepared by adding 50% water to FOX WATERPROF® FS100 must be applied to the surface by brush, roller or spray.
- 4
Coating
After the primer has dried, FOX WATERPROF® FS100 must be applied to the surface by brush, roller or spray to achieve a wet film thickness of 1.00–1.50 mm. At corner joints and cracks, a fibre-reinforced waterproofing mesh must be embedded after the 1st coat, followed by the 2nd coat application.
- 5
Tinting
FOX WATERPROF® FS100 is produced in white. It can be tinted with paste pigments at a rate not exceeding 5% of the material quantity. Once dry, it can be painted with an acrylic-based exterior facade paint.
- 6
Tool Cleaning
Tools and equipment used after application must be cleaned with water. Once FOX WATERPROF® FS100 has hardened, it can only be removed from the surface mechanically.
Critical
FOX WATERPROF® FS100 is not suitable for water tanks, swimming pools or foundation waterproofing.
Critical
The applied material must be protected from rain and frost for the first 24 hours.
Important
Each coat thickness must not exceed 1.00–1.50 mm.
Critical
Must not be applied to wet or damp substrates.
Important
Drying times between coats must be observed.
Important
Precautions must be taken on surfaces that require foot traffic.
Critical
The substrate temperature during application must be between +5°C and +30°C.
Important
The product must be stored in its original unopened packaging, in a dry and cool environment (+5°C to +30°C), protected from sunlight and frost. FOX WATERPROF® FS100 freezes at temperatures below 0°C.
Important
Opened packaging must be resealed and consumed within 1 week.
Important
Pallets must never be stacked on top of each other during storage. Shipment must follow a first-in, first-out system.
Critical
Appropriate work clothing, protective gloves, goggles and a mask must be worn in accordance with occupational health and safety regulations during application. Avoid contact with skin and eyes; if contact occurs, wash immediately with plenty of water and soap. In case of ingestion, seek medical attention immediately.
Critical
Storage and application areas must be ventilated. Approaching storage and application areas with open flames is dangerous.
Important
Food and beverages must not be brought into application areas. Store out of reach of children.
Information
The technical values above are given at +23°C and 50% relative humidity. Higher temperatures shorten the time; lower temperatures extend it.
Related Products
Similar products to this item
