FOX Epoxy Terrazzo (Zeugma) — Cast-in-Place Epoxy Terrazzo

Epoxy Terrazzo • EP 1013 · RAL 9003 • Medium • Matte

FOX ZEUGMA EPOXY TERRAZZO is a multi-layer, self-levelling decorative terrazzo floor coating system produced by casting coloured aggregates in place with an epoxy binder and then grinding the surface. The binder is FOX EPOTHANE® BASECOAT TERRAZZO; total thickness 9-11 mm.

Zeugma Epoxy Medium · Matt; an epoxy terrazzo system with 3-6 mm aggregate and a matt top coat finish. Top coat: FOX DOMINO® PU SEALER FD793 + FOX PURATHANE® TOPCOAT WB (matt).

Aggregate Size

Top Coat

Colour / SampleEP 1013 · RAL 9003

Application Area

Consumption Calculation

Calculate the amount of material needed for the system.

Floor

Primer

Crack-Bridging Membrane

Broadcast

Profile

Coating (Binder + Aggregate + Filler)

Grouting

Top Coat (Matt)

Layers & Products7 layers

1

Primer
Required

Main Product FOX EPOTHANE® PRIMER HB
~0.4 kg/m²

An epoxy-based, two-component, solvent-free, low-viscosity, clear primer (moisture barrier) for damp surfaces. Consumption 0.30-0.50 kg/m².

Main Product 0,1-0,3 mm Kuvars Kumu (60-70 AFS)
~0.4 kg/m²

Added to the primer at a 1:1 ratio depending on the condition of the surface. Consumption 0.30-0.50 kg/m².
2

Crack-Bridging Membrane
Required

Main Product FOX EPOTHANE® ISO-CRACK EP-2K

An epoxy polyurethane-based, 100% solids, flexible membrane — designed to prevent cracks from reflecting through to the surface.

Main Product FOX CAM TEKSTİLİ FİLE 160 gr/m²

Anti-fracture / crack prevention system mesh.
3

Broadcast
Required

Main Product 0,2-0,5 mm Kuvars Kumu (40-45 AFS)
~1.5 kg/m²

Broadcast over the wet primer. Consumption 1.00-2.00 kg/m².
4

Profile
Required

Main Product FOX TERRAZZO L STRIP 8/20 mm

Aluminium profile 8/20 mm high, developed specifically to create patterns; the height is selected according to the system thickness. Consumption varies with pattern density.
5

Coating (Binder + Aggregate + Filler)
Required

Main Product FOX EPOTHANE® BASECOAT TERRAZZO
~5.25 kg/m²

A two-component, solvent-free, self-levelling epoxy terrazzo binder; it can be pigmented in all RAL colours. Consumption 5.00-5.50 kg/m².

Main Product FOX AGREGA STANDART / KRİSTAL / EGZOTİK — 3-6 mm
~15.75 kg/m²

Natural coloured crushed aggregate with specially graded sizes (3-6 mm). Consumption 15.00-16.50 kg/m².

Main Product FOX EPOTHANE® FILLER TF
~5.61 kg/m²

An epoxy terrazzo filler developed specifically for the Fox Zeugma Epoxy Terrazzo System Matrix. Consumption 5.35-5.87 kg/m².
5A

Grinding
Interlayer Step

The surface is ground dry or wet; after the pores are filled with the grouting layer, a final grinding is carried out.
6

Grouting
Required

Main Product FOX EPOTHANE® BASECOAT TERRAZZO

Epoxy binder, used as grouting — for filling the pores before grinding.
7

Top Coat (Matt)
Required

Main Product FOX DOMINO® PU SEALER FD793
~0.125 kg/m²

A polyurethane-based, one-component, UV-resistant, non-yellowing, water-repellent, clear protective material. Consumption 0.10-0.15 kg/m².

Main Product FOX PURATHANE® TOPCOAT WB
~0.175 kg/m²

A modified polyurethane-based, two-component, water-based, UV-resistant matt finish coat containing aliphatic isocyanate. Consumption 0.15-0.20 kg/m².

About Zeugma Epoxy Medium · Matt

Zeugma Epoxy Medium · Matt is an epoxy-based, self-levelling coloured decorative terrazzo floor coating system with a smooth, easy-to-clean and hygienic surface, used for floors exposed to very heavy mechanical and chemical loads. This system uses 3-6 mm aggregate and the surface is completed with a matt finish.

Quartz sand is broadcast over the epoxy primer; after the crack bridging membrane and the pattern profiles, the mixture of FOX EPOTHANE® BASECOAT TERRAZZO, FOX EPOTHANE® FILLER TF filler and aggregate is poured onto the surface and spread with a notched trowel. The cured surface is ground with diamond tooling to expose the aggregate and the pattern; FOX DOMINO® PU SEALER FD793 + FOX PURATHANE® TOPCOAT WB (matt) is then applied as the top coat. The binder can be produced in all RAL colours. The floor can be walked on 24 hours after the application is completed and reaches its final mechanical and chemical resistance in 7 days.

Consumption figures are given for ideal ambient and substrate conditions; a site survey with our specialist team is recommended before defining the system solution.

Advantages

Provides a flawless finish.
Highly decorative and aesthetic floors can be achieved.
It can be completed with a non-slip floor finish on request.
It offers chemical resistance.
Easy to clean, for creating hygienic environments.
It offers high abrasion resistance.
Has high compressive strength.
Easy to maintain.
It is solvent-free.
A gloss or matt top coat finish can be obtained.

Technical Specifications

System Thickness	9-11 mm
Binder	FOX EPOTHANE® BASECOAT TERRAZZO — epoxy, solvent-free, self-levelling
Aggregate	3-6 mm (standard / crystal / exotic)
Top Coat	FOX DOMINO® PU SEALER FD793 + FOX PURATHANE® TOPCOAT WB (matt)
Colour	In RAL colours
Substrate Temperature	+10 °C / +30 °C
Adhesion Strength	To concrete >2 N/mm²
Compressive Strength (7 days)	65 N/mm²
Flexural Tensile Strength (7 days)	30 N/mm²
Shore D Hardness (7 days)	85
Pendulum Hardness (König, ISO 1522)	86 s
Taber Abrasion (1 kg, CS 10, 1000 cycles)	~40 mg
Pot Life	50 dakika
Ready for Use	Foot traffic 24 hours, final strength 7 days (25 °C)

System Detail

Stage	Product / Application Type	Consumption
Primer	FOX EPOTHANE® PRIMER HB	0.4 kg/m²
Primer	0,1-0,3 mm Kuvars Kumu (60-70 AFS)	0.4 kg/m²
Crack-Bridging Membrane	FOX EPOTHANE® ISO-CRACK EP-2K	kg/m²
Crack-Bridging Membrane	FOX CAM TEKSTİLİ FİLE 160 gr/m²	kg/m²
Broadcast	0,2-0,5 mm Kuvars Kumu (40-45 AFS)	1.5 kg/m²
Profile	FOX TERRAZZO L STRIP 8/20 mm	kg/m²
Coating (Binder + Aggregate + Filler)	FOX EPOTHANE® BASECOAT TERRAZZO	5.25 kg/m²
Coating (Binder + Aggregate + Filler)	FOX AGREGA STANDART / KRİSTAL / EGZOTİK — 3-6 mm	15.75 kg/m²
Coating (Binder + Aggregate + Filler)	FOX EPOTHANE® FILLER TF	5.61 kg/m²
Grouting	FOX EPOTHANE® BASECOAT TERRAZZO	kg/m²
Top Coat (Matt)	FOX DOMINO® PU SEALER FD793	0.125 kg/m²
Top Coat (Matt)	FOX PURATHANE® TOPCOAT WB	0.175 kg/m²

Areas of Use

Hospitals
Hotels
Offices
Restaurants
Showrooms
Schools
Banks
Shopping Malls
Airport Terminals
Railway Stations
Public Buildings
Large Storage Areas
Chemical and Pharmaceutical Industry
Hangars
Spaces Requiring Hygienic Conditions

Which substrates can it be applied to?

It is applied to concrete floors at least 28 days old, of minimum class C20 and with a pull-off strength above 1.5 N/mm²; the concrete moisture content at 2 cm depth must be below 4%. Laitance is removed with abrasive equipment and repairs are made with a mixture of FOX EPOTHANE® PRIMER + quartz sand.

What is the difference between matt, semi-matt and gloss finishes?

The finish is determined by the top coat product. This system has a matt finish: FOX DOMINO® PU SEALER FD793 + FOX PURATHANE® TOPCOAT WB (matt). For a matt finish, FOX PURATHANE® TOPCOAT WB is applied over FOX DOMINO® PU SEALER FD793; semi-matt and gloss finishes are achieved with FOX DOMINO® AC SEALER FD792.

Is it resistant to chemicals?

Yes. The epoxy binder provides high chemical resistance; the chemical resistance table is given in the product technical data sheet. If the surface is exposed to chemicals, it must be cleaned within 1 hour at the latest.

Is a non-slip finish possible?

Yes. The system can be completed with a non-slip floor finish on request; please consult our technical team for wet areas and spaces requiring hygienic conditions.

When is the coating ready for use?

At 25 °C the surface can be walked on 24 hours after the application is completed; it reaches its final mechanical and chemical strength at the end of 7 days. Lower temperatures extend these periods.

How is it cleaned and maintained?

It is cleaned with neutral detergents or alkaline solutions diluted to a concentration of 5-10%. Regular maintenance extends the service life of the floor and reduces its tendency to soil.

System Products

All Products

FOX EPOTHANE® PRIMER HB

FOX EPOTHANE® PRIMER HB is a two-component, solvent-free, low-viscosity transparent epoxy primer set developed for dry and damp concrete and steel surfaces. It is used as a primer under epoxy and polyurethane floor coatings.

Suitable for interior and exterior use.
Can be applied and fully cures below +10°C and up to 100% relative humidity.
Provides good corrosion protection on steel.

FOX EPOTHANE® ISO-CRACK EP-2K

FOX EPOTHANE® ISO-CRACK EP-2K is a 100% solids, two-component, flexible epoxy-polyurethane membrane designed to prevent reflective cracking in FOX BAU TERRAZZO coating systems. With 140–160% elongation at break, it provides superior crack bridging against horizontal surface movement.

100% solids for low odour and workplace safety during installation.
Provides excellent adhesion.
Has excellent chemical resistance.

FOX EPOTHANE® BASECOAT TERRAZZO

FOX EPOTHANE® BASECOAT TERRAZZO is an epoxy resin-based, two-component, solvent-free, self-levelling decorative coating material developed for terrazzo systems. It is used in heavily trafficked areas such as airports, hospitals and shopping centres.

Seamless and easy to apply.
Durable.
Excellent compressive and flexural strength.

FOX EPOTHANE® FILLER TF

FOX EPOTHANE® FILLER TF is a quartz-based epoxy terrazzo filler specially developed for the FOX ZEUGMA EPOXY TERRAZZO System Matrix. By filling the voids between aggregates, it ensures the system achieves a homogeneous and uniform structure.

Facilitates easier application of the epoxy terrazzo system.
Ensures that the voids between the aggregates and the matrix are filled.

FOX DOMINO® PU SEALER FD793

FOX DOMINO® PU SEALER FD793 is a single-component, polyurethane-based, solvent-borne transparent topcoat protective material that prevents dusting on all types of concrete floors, imparts a glossy appearance, and provides water-repellent properties.

High abrasion resistance; prevents dusting and creates a harder surface.
Provides waterproofing; prevents cracking that may result from freezing.
Used as a polish thanks to the glossy film layer it forms.

FOX PURATHANE® TOPCOAT WB

FOX PURATHANE® TOPCOAT WB is a modified polyurethane-based, two-component, water-based, UV-resistant topcoat with high abrasion resistance, containing aliphatic isocyanate. It is used in epoxy and polyurethane floor systems, on walls and in various industrial areas.

UV resistant.
Provides excellent adhesion.
Has excellent abrasion resistance.

FOX DOMINO® AC SEALER FD792

FOX DOMINO® AC SEALER FD792 is a single-component, water-based, acrylic-based protective topcoat material that prevents dusting on all types of concrete floors and forms a glossy, protective film layer.

Provides diamond-like clarity and gloss.
Cures faster than conventional topcoat coatings.
Resistant to soiling, high-heel marks, and wheelchair tyre (black) marks.

All Products

Let's Work Together

Let us find the right solution for your space together

Fill in the form with your questions or project request; our team will contact you as soon as possible.

Fox Bau Yapı Kimyasalları Anonim Şirketi regards the protection of fundamental rights and freedoms above all, together with the protection of privacy, the provision and maintenance of information security and respect for ethical values, as among its primary principles. In order to fulfil the disclosure obligation arising from Article 10 of the Personal Data Protection Law, our company, which holds the title of "Data Controller" under Law No. 6698 on the Protection of Personal Data (KVKK), submits for your information the following explanations concerning the processing and protection of your personal data and your special categories of personal data. The term "personal data" used in this document is used so as to cover special categories of personal data as well.

If you do not accept this policy, you should not send us your personal data. However, we would like to point out that in that case there may be disruptions in the services we provide to you and that the service offered may not be fully functional.

We note that you are responsible for the accuracy and currency of the personal data you send us; and if you share the personal data of other people with us, it will be understood that you have obtained from the third party concerned all the permissions required for us to collect, process, use and disclose the information belonging to them, and our Company cannot be held liable in this respect.

OUR PRINCIPLES FOR PROCESSING PERSONAL DATA

All personal data processed by our Company is processed only in accordance with the procedures and principles laid down in the Law and in other laws. Pursuant to Article 4 of the KVKK, the basic principles we observe when processing your personal data are as follows:

Being processed lawfully and in accordance with the rules of good faith.
Being accurate and, where necessary, up to date.
Being processed for specific, explicit and legitimate purposes.
Being relevant, limited and proportionate to the purposes for which they are processed.
Being retained for the period stipulated in the relevant legislation or required for the purpose for which they are processed.

CATEGORIES OF DATA SUBJECTS

A separate policy applies to the processing of the personal data of our employees (including interns and subcontractor employees) whose personal data are processed by our Company. Data subjects other than employees, such as customers, potential customers, visitors, job candidates/interns and the employees, shareholders and officers of the institutions we cooperate with, may also address their requests to our Company under the KVKK.

PURPOSE OF PROCESSING AND TRANSFERRING PERSONAL DATA

Our Company processes personal data only for the purposes and under the conditions set out in the personal data processing conditions specified in Article 5, paragraph 2 and Article 6, paragraph 3 of Law No. 6698 on the Protection of Personal Data. Personal data may be processed where at least one of the items listed below is present:

The existence of the explicit consent of the data subject,
Being expressly provided for by law,
Being necessary for the protection of the life or physical integrity of the person himself or herself or of another person, where that person is unable to give consent due to actual impossibility or whose consent is not deemed legally valid,
Being necessary to process the personal data of the parties to a contract, provided that it is directly related to the conclusion or performance of that contract,
Being mandatory for the data controller to fulfil its legal obligation,
Having been made public by the data subject,
Being mandatory for the establishment, exercise or protection of a right,
Being mandatory for the legitimate interests of the data controller, provided that it does not harm the fundamental rights and freedoms of the data subject.

Under the conditions stated above, our Company may process personal data for the following purposes:

Evaluating potential suppliers/business partners,
Establishing and managing customer relations,
Conducting and concluding the contract process with our suppliers/business partners,
Conducting direct marketing processes,
Communication and support (upon your request),
Compliance with legal obligations,
Protecting the interests of the Company and ensuring its security,
Planning and carrying out the Company's commercial activities,
Reporting and auditing,
Protection of rights and interests.

We share your Personal Data with other parties, including professional advisers such as those listed below:

We share your personal data and your special categories of personal data, within the framework of legal grounds and your consent and within the scope of the personal data processing purposes stated above, with public institutions and organisations, banks, insurance companies, auditors, lawyers, accountants, other external professional advisers, the Joint Health and Safety Unit for the purpose of fulfilling occupational health and safety obligations, law enforcement authorities in line with our legal obligations, domestic and foreign service providers from which we receive services within the scope of marketing activities where consent has been given, and our contracted workplace physician.

WHEN DO WE COLLECT PERSONAL DATA ABOUT YOU?

We collect your personal data in the following cases:

When you visit our Company, or purchase or use our products and services,
If you are a natural or legal person purchasing goods and services from our Company,
When you sell us goods or provide us with services,
When you choose to receive our marketing communications,
When you contact us through our website, e-mail, social media platforms, other online channels or by telephone,
When you take part in our company events, social responsibility projects and organisations,
When you contact us for any purpose as a potential customer, supplier, business partner or subcontractor,
If you have applied for a job with our Company in any way or have made your CV and related information available for our Company's review.

We will process the personal data we obtain in the above cases only in accordance with this Notice.

WHICH OF YOUR PERSONAL DATA DO WE PROCESS?

Our personal data processing methods operate through our website, by telephone or e-mail, through electronic applications specific to our customers, through your participation in our business events and surveys, or through your interaction with us in any other way. In this context, the categories of personal data we process about you are as follows:

Identity information
Contact information
Images and/or videos that may identify you
Financial data
Any other information you decide to share with our Company of your own accord
Automatically collected electronic data
Legal transaction and compliance information
Corporate customer/Supplier data
Incident management and security information
Personal data collected from other sources

ON WHICH LEGAL GROUNDS DO WE PROCESS YOUR PERSONAL DATA?

Personal data is collected, used, recorded, stored and processed by our Company by providing data subjects with clear and comprehensible written information and, where necessary, obtaining their explicit consent, lawfully and in accordance with the rules of good faith, in a manner connected with and limited to the legitimate purpose clearly stated above, and within the framework of the principle of proportionality.

We process your personal data in line with the following legal grounds, which are set out in Article 5 of the KVKK and also appear under the heading "Purpose of Processing and Transferring Personal Data" of this policy, in particular the Turkish Commercial Code No. 6102, the Turkish Code of Obligations No. 6098, the Tax Procedure Law No. 213 and electronic commerce legislation:

The existence of the explicit consent of the data subject,
Being expressly provided for by law,
Being necessary for the protection of the life or physical integrity of the person himself or herself or of another person, where that person is unable to give consent due to actual impossibility or whose consent is not deemed legally valid,
Being necessary to process the personal data of the parties to a contract, provided that it is directly related to the conclusion or performance of that contract,
Being mandatory for the data controller to fulfil its legal obligation,
Having been made public by the data subject,
Being mandatory for the establishment, exercise or protection of a right,
Being mandatory for the legitimate interests of the data controller, provided that it does not harm the fundamental rights and freedoms of the data subject.

Where your Personal Data is processed on the basis of explicit consent, we would like to point out that if you withdraw your explicit consent, you will be removed from the commercial membership programme for which the processing based on that explicit consent is necessary, and that as of the relevant date you will no longer be able to benefit from the advantages you enjoyed through such processing.

RETENTION AND DESTRUCTION PERIODS FOR PERSONAL DATA

Your personal data will be stored for the retention periods specified in the relevant legislation or for as long as the processing purposes mentioned above require. At the end of this period, the data will be deleted, destroyed or anonymised in full compliance with the KVKK. In this context, a Personal Data Retention and Destruction Policy and the related procedures have been prepared and are applied.

HOW DO WE PROTECT YOUR PERSONAL DATA?

In order to protect your personal data and to prevent unlawful access to it, our Company takes the necessary administrative and technical measures in line with the Personal Data Security Guide published by the Personal Data Protection Authority, draws up internal procedures, prepares disclosure and explicit consent texts and, pursuant to Article 12/3 of the KVKK, carries out, or has carried out through external services, the audits necessary to ensure the implementation of the provisions of the KVKK.

WHAT ARE YOUR RIGHTS REGARDING YOUR PERSONAL DATA?

Pursuant to Article 11 of the KVKK, everyone has the following rights concerning themselves by applying to the data controller:

To learn whether personal data is processed,
To request information if personal data has been processed,
To learn the purpose of processing personal data and whether it is used in accordance with that purpose,
To know the third parties to whom personal data is transferred in Turkey or abroad,
To request the correction of personal data if it has been processed incompletely or incorrectly,
To request the deletion or destruction of personal data within the framework of the conditions set out in Article 7 of the KVKK,
To request that the operations carried out pursuant to subparagraphs (d) and (e) be notified to the third parties to whom the personal data has been transferred,
To object to a result arising against the person themselves through the analysis of the processed data exclusively by automated systems,
To request compensation for the damage suffered in the event of damage due to the unlawful processing of personal data.

TO MAKE A REQUEST UNDER THE PERSONAL DATA PROTECTION LAW

To obtain more detailed information about your Personal Data, you can access the information request application form from our company's website at https://www.foxbau.com/ and from the address Organize Sanayi Bölgesi 1. Kısım 7. Cadde No:6 Döşemealtı – Antalya / TÜRKİYE in person.

So that we can respond to your requests regarding your Personal Data as quickly as possible, your requests and questions must be submitted clearly, comprehensibly and with a specific date.

Epoxy Terrazzo

Primer

Crack-Bridging Membrane

Broadcast

Profile

Coating (Binder + Aggregate + Filler)

Grinding

Grouting

Top Coat (Matt)