FOX Sagalassos Decorative Microconcrete Coating

Sagalassos • Cream • Standard

FOX SAGALASSOS STANDARD is a cement and polymer dispersion based decorative coating system that can be applied to any surface indoors and outdoors, UV resistant, anti-slip, with high strength and abrasion resistance. Layer build-up: FOX UNIPRIMER FL555 primer (+ reinforcement mesh), two coats of FOX DOMINO® BASECOAT BC mixed with FOX DOMINO® POLYMER SG, sanding and transition primer between coats, FOX DOMINO® AC SEALER FD791 and FOX PURATHANE® TOPCOAT WB top coat. The surface is shaped with a trowel.

10 colour chart shades; all colours are obtained in the mix with FOX DOMINO® COLOR WB pigment. The colour choice does not change the layer build-up.

Texture Type

Colour SelectionCream

Consumption Calculation

Calculate the amount of material needed for the system.

Floor

Primer

1st Coating Layer

Transition Primer

2nd Coating Layer

Sealer

Top Coat

Layers & Products6 layers

1

Primer
Required

Main Product FOX UNIPRIMER FL555
~0.28 kg/m²

A polymer-modified, resin-based, one-component, ready-to-use special primer developed for absorbent and slightly absorbent substrates. Consumption 0.25-0.30 kg/m².

Main Product FOX ALKALİ YALITIM DONATI FİLESİ

56 gr/m² reinforcement mesh — used to increase strength between the application layers.
2

1st Coating Layer
Required

Main Product FOX DOMINO® BASECOAT BC
~2.25 kg/m²

A cement-based coating material developed for the FOX SAGALASSOS decorative system. Consumption 2.00-2.50 kg/m². The stock colour is white.

Main Product FOX DOMINO® POLYMER SG
~0.54 kg/m²

A liquid polymer material with a water-based copolymer structure, developed specifically for the FOX SAGALASSOS system. Consumption 0.48-0.60 kg/m².

Main Product FOX DOMINO® COLOR WB

A water-based, ready-to-use colour pigment pack — all other colours are obtained by adding it to the mix.
2A

Sanding
Interlayer Step

Between coats, sanding is carried out with 60 grit; the dust is removed with an industrial vacuum.
3

Transition Primer
Required

Main Product FOX UNIPRIMER FL555

Applied by brush or roller after dilution with water at a ratio of 1/2.
4

2nd Coating Layer
Required

Main Product FOX DOMINO® BASECOAT BC
~2.25 kg/m²

A cement-based coating material developed for the FOX SAGALASSOS decorative system. Consumption 2.00-2.50 kg/m².

Main Product FOX DOMINO® POLYMER SG
~0.54 kg/m²

A liquid polymer material with a water-based copolymer structure, developed specifically for the FOX SAGALASSOS system. Consumption 0.48-0.60 kg/m².

Main Product FOX DOMINO® COLOR WB

A water-based, ready-to-use colour pigment pack.
4A

Texturing
Interlayer Step

Textured with a trowel; the application technique and craftsmanship determine the distinctive texture. Between coats the surface is sanded with 60 grit and the dust is vacuumed.
5

Sealer
Required

Main Product FOX DOMINO® AC SEALER FD791

An acrylic-based, one-component, water-based, dust-proofing, water-repellent finish coat protective material.
6

Top Coat
Required

Main Product FOX PURATHANE® TOPCOAT WB

A polyurethane-based, two-component, water-based finish coat material.

About Sagalassos Standard

Fox Sagalassos is a cement and polymer dispersion based decorative coating system that creates distinctive designs on old or new surfaces through its colour options and application techniques (trowel, roller, hopper spray). When the application technique meets the skill of the craftsman applicator, unique, original finishes emerge. It retains the practicality of concrete and turns it into a decorative surface reminiscent of the beauty of natural elements such as stone, rock, wood, ceramic and brick. It is extremely resistant to abrasion, oils, water, atmospheric effects and UV radiation.

The concrete must be at least 28 days old and of class C20, with a tensile strength of ≥1.5 N/mm² and a moisture content below 4%; the surface is opened with abrasive equipment, repairs are made with FOX FASTMORTAR FC245 and the surface is wetted before application without ponding. FOX UNIPRIMER FL555 is thinned with water at a ratio of 1/2 and applied as a primer with a brush or roller (0.25-0.30 kg/m²); depending on the condition of the surface, FOX ALKALI-RESISTANT REINFORCEMENT MESH is embedded. FOX DOMINO® COLOR WB pigment is added into FOX DOMINO® POLYMER SG, then FOX DOMINO® BASECOAT BC is added and mixed at 600-1000 rpm for 3-4 minutes (1 kg powder : ~240 g polymer); the 1st coat is trowelled onto the dampened surface (2.00-2.50 kg/m² powder, 0.48-0.60 kg/m² polymer). The dried coat is sanded with 60-grit abrasive, dust is removed, FOX UNIPRIMER FL555 transition primer is applied and the 2nd coat is laid in the same way. Both coats are shaped with a trowel; the trowel marks create the character of the Standard texture. The surface is protected with FOX DOMINO® AC SEALER FD791 and finished with FOX PURATHANE® TOPCOAT WB.

The coating can be walked on after 24 hours at 25 °C and reaches its final strength in 28 days. Consumption figures are given for ideal conditions at +20 °C; a site visit by our expert team is recommended before the system solution.

Advantages

Renews existing surfaces (concrete, screed, ceramic tile, marble) without removing them.
Gives the space a continuous, seamless appearance; it is monolithic, with no joints.
Provides a UV-resistant, watertight and anti-slip surface.
Reduces dusting on concrete surfaces and is easy to clean.
Resists scaling caused by freeze-thaw cycles.
Has high strength and wear resistance.
Unlimited colour options through colour mixes; textured, creative finishes.
Solvent free; easy to maintain.

Technical Specifications

System Type	Decorative microconcrete — Standard texture (trowel)
Coating	FOX DOMINO® BASECOAT BC — 2 coats, 2.00-2.50 kg/m² per coat
Colour	10 colour chart shades (Chocolate, Cotto, Stone Grey, Smoky, White, Cream, Oyster, Camel, Terracotta, Mold); white is the stock colour, the others are produced with FOX DOMINO® COLOR WB
Primer	FOX UNIPRIMER FL555 — 0.25-0.30 kg/m² (thinned 1/2 with water); transition primer between coats
Reinforcement	FOX ALKALI-RESISTANT REINFORCEMENT MESH — 1.00-1.10 m²/m²
Polymer	FOX DOMINO® POLYMER SG — 0.48-0.60 kg/m² per coat (1 kg powder : ~240 g)
Protective Coat	FOX DOMINO® AC SEALER FD791
Top Coat	FOX PURATHANE® TOPCOAT WB
Dry / Fresh Mortar Density	1.50±0.10 / 1.80±0.10 kg/lt
Pot Life	45 dakika
Compressive Strength	7 days ≥12 N/mm² · 28 days ≥18 N/mm²
Flexural Strength	7 days ≥5 N/mm² · 28 days ≥7 N/mm²
Adhesion Strength	≥1.5 N/mm² to concrete
Abrasion (EN 13892/4)	Maximum 50 µ
Water Vapour Permeability (EN 12086)	198 µ
Application Temperature	+5 °C / +30 °C (floor); ambient +10 °C / +30 °C
Ready for Use	Foot traffic after 24 hours (25 °C); final strength 28 days

System Detail

Stage	Product / Application Type	Consumption
Primer	FOX UNIPRIMER FL555	0.28 kg/m²
Primer	FOX ALKALİ YALITIM DONATI FİLESİ	kg/m²
1st Coating Layer	FOX DOMINO® BASECOAT BC	2.25 kg/m²
1st Coating Layer	FOX DOMINO® POLYMER SG	0.54 kg/m²
1st Coating Layer	FOX DOMINO® COLOR WB	kg/m²
Transition Primer	FOX UNIPRIMER FL555	kg/m²
2nd Coating Layer	FOX DOMINO® BASECOAT BC	2.25 kg/m²
2nd Coating Layer	FOX DOMINO® POLYMER SG	0.54 kg/m²
2nd Coating Layer	FOX DOMINO® COLOR WB	kg/m²
Sealer	FOX DOMINO® AC SEALER FD791	kg/m²
Top Coat	FOX PURATHANE® TOPCOAT WB	kg/m²

Areas of Use

Indoor and Outdoor Living Areas
Poolside and Pool Surroundings
Walkways and Pavements
Public Areas and Parks
Outdoor Commercial Areas
Areas Exposed to Heavy Foot Traffic
Shopping Centres
Shops and Showrooms
Hotels, Restaurants and Cafés
Offices, Museums and Galleries

Which surfaces is the system applied to?

It is applied over existing surfaces such as concrete, screed, ceramic tile and marble without removing them. The concrete must be at least 28 days old and of class C20, with a tensile strength of ≥1.5 N/mm² and moisture ≤4%; the surface must be wetted before application without ponding.

How are the colours obtained?

White is the stock colour; the 10 shades on the colour chart and the intermediate tones obtained by mixing are produced by adding FOX DOMINO® COLOR WB pigment to the polymer. The colours on the chart may differ from the original depending on the printing technique and the ambient light.

What is the difference between Standard and Touch?

Both are the same cement and polymer dispersion based system; the texture comes from the application technique. Standard gives a smooth trowelled surface, while Touch, with the textured FOX DOMINO® BASECOAT BC TOUCH, gives a surface with trowel marks.

How is it maintained?

No initial maintenance is required. Dust and dirt are removed with a vacuum cleaner and a microfibre mop; alcohol-based cleaners developed for decorative coatings, such as FOX CLEANER FR340, are used diluted to 1-5%.

What determines the Standard texture?

The applicator's trowel technique. With the same product and colour, every application gives a unique surface depending on the direction and density of the trowel marks; confirmation with a sample is recommended.

System Products

All Products

FOX UNIPRIMER FL555

FOX UNIPRIMER FL555 is a polymer-modified, solvent-free, ready-to-use special primer that provides excellent adhesion on concrete, screed, ceramic, and wooden surfaces.

Ready to use.
Easy to apply.
Thinned with water only.

FOX SAGALASSOS STANDARD BC

FOX SAGALASSOS STANDARD BC, is a cement based decorative coating material developed for decorative systems such as FOX SAGALASOS and FOX TERMESSOS .

FOX SAGALASSOS POLYMER

FOX SAGALASSOS POLYMER is a water-based liquid copolymer material used within the FOX SAGALASSOS system that increases adhesion and provides flexibility.

Easy to prepare and apply.
Increases adhesion.
Reduces water absorption.

FOX DOMINO® AC SEALER FD791

FOX DOMINO® AC SEALER FD791 is an acrylic-based, single-component topcoat protective material applicable to all types of concrete floors, preventing dusting, repelling water and forming a glossy film layer.

Increases abrasion resistance and prevents dusting.
Provides water impermeability and prevents cracks that may occur due to freezing.
Used as a polish thanks to the glossy film layer it forms.

FOX PURATHANE® TOPCOAT WB

FOX PURATHANE® TOPCOAT WB is a modified polyurethane-based, two-component, water-based, UV-resistant topcoat with high abrasion resistance, containing aliphatic isocyanate. It is used in epoxy and polyurethane floor systems, on walls and in various industrial areas.

UV resistant.
Provides excellent adhesion.
Has excellent abrasion resistance.

FOX SAGALASSOS TOUCH BC

All Products

Let's Work Together

Let us choose the right texture for your space together

Fill in the form with your questions or project request; our team will contact you as soon as possible.

Sagalassos Standard

Fox Bau Yapı Kimyasalları Anonim Şirketi regards the protection of fundamental rights and freedoms above all, together with the protection of privacy, the provision and maintenance of information security and respect for ethical values, as among its primary principles. In order to fulfil the disclosure obligation arising from Article 10 of the Personal Data Protection Law, our company, which holds the title of "Data Controller" under Law No. 6698 on the Protection of Personal Data (KVKK), submits for your information the following explanations concerning the processing and protection of your personal data and your special categories of personal data. The term "personal data" used in this document is used so as to cover special categories of personal data as well.

If you do not accept this policy, you should not send us your personal data. However, we would like to point out that in that case there may be disruptions in the services we provide to you and that the service offered may not be fully functional.

We note that you are responsible for the accuracy and currency of the personal data you send us; and if you share the personal data of other people with us, it will be understood that you have obtained from the third party concerned all the permissions required for us to collect, process, use and disclose the information belonging to them, and our Company cannot be held liable in this respect.

OUR PRINCIPLES FOR PROCESSING PERSONAL DATA

All personal data processed by our Company is processed only in accordance with the procedures and principles laid down in the Law and in other laws. Pursuant to Article 4 of the KVKK, the basic principles we observe when processing your personal data are as follows:

Being processed lawfully and in accordance with the rules of good faith.
Being accurate and, where necessary, up to date.
Being processed for specific, explicit and legitimate purposes.
Being relevant, limited and proportionate to the purposes for which they are processed.
Being retained for the period stipulated in the relevant legislation or required for the purpose for which they are processed.

CATEGORIES OF DATA SUBJECTS

A separate policy applies to the processing of the personal data of our employees (including interns and subcontractor employees) whose personal data are processed by our Company. Data subjects other than employees, such as customers, potential customers, visitors, job candidates/interns and the employees, shareholders and officers of the institutions we cooperate with, may also address their requests to our Company under the KVKK.

PURPOSE OF PROCESSING AND TRANSFERRING PERSONAL DATA

Our Company processes personal data only for the purposes and under the conditions set out in the personal data processing conditions specified in Article 5, paragraph 2 and Article 6, paragraph 3 of Law No. 6698 on the Protection of Personal Data. Personal data may be processed where at least one of the items listed below is present:

The existence of the explicit consent of the data subject,
Being expressly provided for by law,
Being necessary for the protection of the life or physical integrity of the person himself or herself or of another person, where that person is unable to give consent due to actual impossibility or whose consent is not deemed legally valid,
Being necessary to process the personal data of the parties to a contract, provided that it is directly related to the conclusion or performance of that contract,
Being mandatory for the data controller to fulfil its legal obligation,
Having been made public by the data subject,
Being mandatory for the establishment, exercise or protection of a right,
Being mandatory for the legitimate interests of the data controller, provided that it does not harm the fundamental rights and freedoms of the data subject.

Under the conditions stated above, our Company may process personal data for the following purposes:

Evaluating potential suppliers/business partners,
Establishing and managing customer relations,
Conducting and concluding the contract process with our suppliers/business partners,
Conducting direct marketing processes,
Communication and support (upon your request),
Compliance with legal obligations,
Protecting the interests of the Company and ensuring its security,
Planning and carrying out the Company's commercial activities,
Reporting and auditing,
Protection of rights and interests.

We share your Personal Data with other parties, including professional advisers such as those listed below:

We share your personal data and your special categories of personal data, within the framework of legal grounds and your consent and within the scope of the personal data processing purposes stated above, with public institutions and organisations, banks, insurance companies, auditors, lawyers, accountants, other external professional advisers, the Joint Health and Safety Unit for the purpose of fulfilling occupational health and safety obligations, law enforcement authorities in line with our legal obligations, domestic and foreign service providers from which we receive services within the scope of marketing activities where consent has been given, and our contracted workplace physician.

WHEN DO WE COLLECT PERSONAL DATA ABOUT YOU?

We collect your personal data in the following cases:

When you visit our Company, or purchase or use our products and services,
If you are a natural or legal person purchasing goods and services from our Company,
When you sell us goods or provide us with services,
When you choose to receive our marketing communications,
When you contact us through our website, e-mail, social media platforms, other online channels or by telephone,
When you take part in our company events, social responsibility projects and organisations,
When you contact us for any purpose as a potential customer, supplier, business partner or subcontractor,
If you have applied for a job with our Company in any way or have made your CV and related information available for our Company's review.

We will process the personal data we obtain in the above cases only in accordance with this Notice.

WHICH OF YOUR PERSONAL DATA DO WE PROCESS?

Our personal data processing methods operate through our website, by telephone or e-mail, through electronic applications specific to our customers, through your participation in our business events and surveys, or through your interaction with us in any other way. In this context, the categories of personal data we process about you are as follows:

Identity information
Contact information
Images and/or videos that may identify you
Financial data
Any other information you decide to share with our Company of your own accord
Automatically collected electronic data
Legal transaction and compliance information
Corporate customer/Supplier data
Incident management and security information
Personal data collected from other sources

ON WHICH LEGAL GROUNDS DO WE PROCESS YOUR PERSONAL DATA?

Personal data is collected, used, recorded, stored and processed by our Company by providing data subjects with clear and comprehensible written information and, where necessary, obtaining their explicit consent, lawfully and in accordance with the rules of good faith, in a manner connected with and limited to the legitimate purpose clearly stated above, and within the framework of the principle of proportionality.

We process your personal data in line with the following legal grounds, which are set out in Article 5 of the KVKK and also appear under the heading "Purpose of Processing and Transferring Personal Data" of this policy, in particular the Turkish Commercial Code No. 6102, the Turkish Code of Obligations No. 6098, the Tax Procedure Law No. 213 and electronic commerce legislation:

The existence of the explicit consent of the data subject,
Being expressly provided for by law,
Being necessary for the protection of the life or physical integrity of the person himself or herself or of another person, where that person is unable to give consent due to actual impossibility or whose consent is not deemed legally valid,
Being necessary to process the personal data of the parties to a contract, provided that it is directly related to the conclusion or performance of that contract,
Being mandatory for the data controller to fulfil its legal obligation,
Having been made public by the data subject,
Being mandatory for the establishment, exercise or protection of a right,
Being mandatory for the legitimate interests of the data controller, provided that it does not harm the fundamental rights and freedoms of the data subject.

Where your Personal Data is processed on the basis of explicit consent, we would like to point out that if you withdraw your explicit consent, you will be removed from the commercial membership programme for which the processing based on that explicit consent is necessary, and that as of the relevant date you will no longer be able to benefit from the advantages you enjoyed through such processing.

RETENTION AND DESTRUCTION PERIODS FOR PERSONAL DATA

Your personal data will be stored for the retention periods specified in the relevant legislation or for as long as the processing purposes mentioned above require. At the end of this period, the data will be deleted, destroyed or anonymised in full compliance with the KVKK. In this context, a Personal Data Retention and Destruction Policy and the related procedures have been prepared and are applied.

HOW DO WE PROTECT YOUR PERSONAL DATA?

In order to protect your personal data and to prevent unlawful access to it, our Company takes the necessary administrative and technical measures in line with the Personal Data Security Guide published by the Personal Data Protection Authority, draws up internal procedures, prepares disclosure and explicit consent texts and, pursuant to Article 12/3 of the KVKK, carries out, or has carried out through external services, the audits necessary to ensure the implementation of the provisions of the KVKK.

WHAT ARE YOUR RIGHTS REGARDING YOUR PERSONAL DATA?

Pursuant to Article 11 of the KVKK, everyone has the following rights concerning themselves by applying to the data controller:

To learn whether personal data is processed,
To request information if personal data has been processed,
To learn the purpose of processing personal data and whether it is used in accordance with that purpose,
To know the third parties to whom personal data is transferred in Turkey or abroad,
To request the correction of personal data if it has been processed incompletely or incorrectly,
To request the deletion or destruction of personal data within the framework of the conditions set out in Article 7 of the KVKK,
To request that the operations carried out pursuant to subparagraphs (d) and (e) be notified to the third parties to whom the personal data has been transferred,
To object to a result arising against the person themselves through the analysis of the processed data exclusively by automated systems,
To request compensation for the damage suffered in the event of damage due to the unlawful processing of personal data.

TO MAKE A REQUEST UNDER THE PERSONAL DATA PROTECTION LAW

To obtain more detailed information about your Personal Data, you can access the information request application form from our company's website at https://www.foxbau.com/ and from the address Organize Sanayi Bölgesi 1. Kısım 7. Cadde No:6 Döşemealtı – Antalya / TÜRKİYE in person.

So that we can respond to your requests regarding your Personal Data as quickly as possible, your requests and questions must be submitted clearly, comprehensibly and with a specific date.

Sagalassos

Primer

1st Coating Layer

Sanding

Transition Primer

2nd Coating Layer

Texturing

Sealer

Top Coat