Olympos Stucco

Olympos Stucco • Agate Grey • MARMORINO

FOX OLYMPOS STUCCO is a cement-based decorative plaster system that can be burnished and patterned. Over the same primer and top-coat protection layers, the coating product and the application tool change according to the selected shaping technique; each technique produces its own distinctive surface texture.

Olympos Stucco Marmorino is the system applied with FOX DOMINO® MULTI FD785 and shaped with the Marmorino technique. Your choice of shaping technique determines the layer structure, the section drawing and the consumption; the colour is selected from the same FOX DOMINO® COLOR palette in every technique.

Consumption Calculation

Calculate the amount of material needed for the system.

Wall

Primer

Coating

Dampening

Coating

Top Coat

Layers & Products6 layers

1

Primer
Required

Main Product FOX PRIMERA® FL220
~0.08 kg/m²

General-purpose, water-based, clear, universal primer for absorbent and highly absorbent surfaces

Packaging
1 lt
5 lt
10 lt
20 lt
2

Primer
Required

Main Product FOX DECOPRIMER FL204
~0.3 kg/m²

Fast-drying, multi-purpose primer for decorative finish coat renders and microcement coatings

Packaging
8 kg
3 kg
3

Coating
Required

Main Product FOX DOMINO® MULTI FD785
~1.5 kg/m²

Decorative Fine Finish Coat Render

Packaging
25 kg
4

Dampening
Required

Main Product FOX PRIMERA® FL220
~0.05 kg/m²

General-purpose, water-based, clear, universal primer for absorbent and highly absorbent surfaces

Packaging
1 lt
5 lt
10 lt
20 lt
5

Coating
Required

Main Product FOX DOMINO® MULTI FD785
~1.5 kg/m²

Decorative Fine Finish Coat Render

Packaging
25 kg
5A

Sanding
Interlayer Step

120 Kum
6

Top Coat
Required

Main Product FOX DOMINO® AC SEALER FD790
~0.15 kg/m²

Akrilik esaslı, tek komponentli, su bazlı tozuma önleyici, su itici özellikte, son kat koruma malzemesi

Packaging
5 kg

About Olympos Stucco Marmorino

Every Stucco application is the reflection of your dreams on your walls. With Olympos Stucco, every wall in your spaces tells a story of its own. Olympos Stucco Marmorino is applied with FOX DOMINO® MULTI FD785, a decorative fine top-coat plaster made from special cement, flexible polymer additives and fillers, and shaped with the Marmorino technique.

The surface is primed with FOX PRIMERA® FL220 and FOX DECOPRIMER FL204. Two coats of FOX DOMINO® MULTI FD785 (1.5 kg/m²) are applied; once dry, the surface is sanded with 120 grit sandpaper to obtain a smooth marmorino texture. Finally, FOX DOMINO® AC SEALER FD790 is applied in two coats with a short-pile velvet roller, making the surface water-repellent and dust-free. This product is not merely a wall covering but a surface that reflects the character of your space: it gives the wall a uniform appearance, is quick and easy to apply, and can be burnished and patterned.

The layers above and the products specified in them are given for standard conditions. For conditions outside the standard, please consult our technical service for system details and further information.

Advantages

Used in interior and exterior spaces.
Creates a single, seamless surface with no joints on the wall.
Applied quickly and easily.
Can be burnished and patterned.
Provides excellent adhesion.
Resistant to impact.
Offers original surfaces that vary with the shaping technique and colour selection.

Technical Specifications

System Type	Cement-based decorative plaster system that can be burnished and patterned
Shaping Technique	Marmorino
Coating Product	FOX DOMINO® MULTI FD785
Coating Consumption	approx. 3 kg/m² (total)
Primer	FOX PRIMERA® FL220 (approx. 0.08 kg/m²) + FOX DECOPRIMER FL204 (approx. 0.30 kg/m²)
Top Coat Protection	FOX DOMINO® AC SEALER FD790, 2 coats, approx. 0.15 kg/m²
Colour	FOX DOMINO® COLOR palette: Stone Grey, Olive Grey, Charcoal, Smoky, Cream, Oyster, Dale, Beige, Tortora, Cappuccino 25%, Cappuccino 50%, Brown 50%, Terracotta, Blue Nile, Marine, Avocado Green, Yellow, Lavanda
Area of Use	Interior and exterior walls
Application Temperature	+5 °C / +30 °C (ambient, surface and material)
Compressive Strength (28 days)	25–33,5 N/mm²
Flexural Strength (28 days)	7–9 N/mm²
Adhesion Strength	2,5 N/mm²
Application Thickness	1–3 mm per coat
Full Curing	28 days
Abrasive Paper	120 kum
Surface Protection (FD790)	Drying 6 hours, second coat after 4 hours; water-repellent, prevents dusting

System Detail

Stage	Product / Application Type	Consumption
Primer	FOX PRIMERA® FL220	0.08 kg/m²
Primer	FOX DECOPRIMER FL204	0.3 kg/m²
Coating	FOX DOMINO® MULTI FD785	1.5 kg/m²
Dampening	FOX PRIMERA® FL220	0.05 kg/m²
Coating	FOX DOMINO® MULTI FD785	1.5 kg/m²
Top Coat	FOX DOMINO® AC SEALER FD790	0.15 kg/m²

Areas of Use

Shops and Showrooms
Offices
Hotels, Restaurants and Cafés
Residences
Shopping Centres
Museums and Galleries

Frames from Spaces

Olympos Stucco — kemerli iç mekân, sıcak bej duvar ve zemin bütünlüğü

Olympos Stucco — terracotta banyo duvarı

Olympos Stucco — havuzlu avlu, açık bej duvarlar

Olympos Stucco — terracotta dış cephe, havuz kenarı

Olympos Stucco — terracotta dış cephe, peyzaj

Olympos Stucco — krem iç duvar, bitki nişi

Olympos Stucco — bordo/pembe iç duvar uygulaması

Olympos Stucco — beyaz dış cephe, kemerli giriş

Olympos Stucco — beyaz dış cephe, kemer detayı

Which surfaces can Stucco be applied to?

It is applied to brick, block, concrete, fair-faced concrete, aerated concrete, gypsum plaster and gypsum concrete walls. The surface is freed from dust, oil and loose particles and made sound and dry; cracks and surface irregularities are repaired with suitable repair mortars. It is then primed with FOX PRIMERA® FL220 and FOX DECOPRIMER FL204.

What sets the Marmorino technique apart from the other techniques?

All techniques use the same primer and protective layers; the difference lies in the coating product and the shaping tool. Two coats of FOX DOMINO® MULTI FD785 (1.5 kg/m²) are applied; once dry, the surface is sanded with 120 grit sandpaper to obtain a smooth marmorino texture.

Can it be used outdoors?

Yes. The system is used on interior and exterior walls. Outdoors it must be protected from sun, rain, wind and frost for the first 24 hours; in hot weather the surface must be kept damp.

How is the colour determined, and can it be changed later?

The colour comes from FOX DOMINO® COLOR pigment paste added to the mixing water of the coating layer; it is applied in Stone Grey, Olive Grey, Charcoal, Smoky, Cream, Oyster, Dale, Beige, Tortora, Cappuccino 25%, Cappuccino 50%, Brown 50%, Terracotta, Blue Nile, Marine, Avocado Green, Yellow and Lavanda. The surface can be renewed by applying a new coating layer over it.

Can it be wiped clean, and how is it maintained?

The FOX DOMINO® AC SEALER FD790 top coat is water-repellent and prevents dusting; the surface can be wiped with a damp cloth. After application, the coating must be protected from direct contact with water for at least 24 hours.

What are the application conditions?

The ambient, surface and material temperature must be between +5 °C and +30 °C. Materials are brought to site 1–2 days in advance so that they adapt to the ambient conditions; mixing is carried out with an electric mixer at 300–400 rpm. Consumption figures are given for ideal conditions at 23 °C; they increase on uneven surfaces and in cold weather.

System Products

All Products

FOX PRIMERA® FL220

FOX PRIMERA® FL220 is a polymer dispersion-based, single-component, water-based universal primer. It is used to increase adhesion and provide moisture protection on absorbent and weak surfaces in interior and exterior applications.

Extremely easy to apply.
Increases adhesion.
Prevents the substrate from rapidly absorbing the water from the plaster to be applied, thereby preventing sudden drying cracks.

FOX DECOPRIMER FL204

FOX DECOPRIMER FL204 is a fast-drying, multi-purpose primer based on acrylic dispersion. It is used in interior and exterior applications on concrete, wood and composite surfaces to increase adhesion strength prior to decorative coatings.

Penetrates deeply.
Increases surface adhesion.
High performance.

FOX DOMINO® WALL FD787

FOX DOMINO® WALL FD787 is a decorative finish coat coloured render manufactured from special cement, flexible polymer additives and fillers, for interior and exterior surfaces.

Provides a decorative finish.
Impact-resistant, creates seamless and solid surfaces.
Provides excellent adhesion.

FOX DOMINO® FINE FD786

Decorative Fine Finishing Plaster

FOX DOMINO® MULTI FD785

FOX DOMINO® MULTI FD785 is a decorative thin finish plaster produced from special cement and flexible polymer additives. It is used on brick, concrete, aerated concrete, and gypsum surfaces in interior and exterior applications.

Tintable.
Provides a decorative finish.
Impact-resistant; creates solid, seamless surfaces.

FOX THERM-ALL® MINPLAST FT377

FOX THERM-ALL® MINPLAST FT377 is a cement-based, polymer-reinforced general-purpose decorative mineral render mortar. It is used on interior and exterior facades as the final decorative coat in thermal insulation systems.

Provides excellent adhesion.
Can be painted in any desired colour.
Easy to prepare and apply.

FOX BETON FINISH FD784

FOX BETON FINISH FD784 is a cement-based decorative coating material modified with special additives, providing a fair-faced concrete (sichtbeton) effect in interior spaces. It is used together with FOX BETON FINISH FOIL.

Provides fast and easy application.
Offers high mechanical strength and abrasion resistance.
Has a fair-faced concrete appearance.

FOX DOMINO® AC SEALER FD790

FOX DOMINO® AC SEALER FD790 is an acrylic-based, water-based, single-component topcoat protective material used to prevent dusting and impart a glossy appearance on all types of concrete and cement-based floor surfaces.

Increases abrasion resistance and prevents dusting.
Provides waterproofing and prevents cracks that may occur as a result of freezing.
Used as a polish thanks to the glossy film layer it forms.

All Products

Let's Work Together

Let us find the right solution for your space together

Fill in the form with your questions or project request; our team will contact you as soon as possible.

Olympos Stucco

Fox Bau Yapı Kimyasalları Anonim Şirketi regards the protection of fundamental rights and freedoms above all, together with the protection of privacy, the provision and maintenance of information security and respect for ethical values, as among its primary principles. In order to fulfil the disclosure obligation arising from Article 10 of the Personal Data Protection Law, our company, which holds the title of "Data Controller" under Law No. 6698 on the Protection of Personal Data (KVKK), submits for your information the following explanations concerning the processing and protection of your personal data and your special categories of personal data. The term "personal data" used in this document is used so as to cover special categories of personal data as well.

If you do not accept this policy, you should not send us your personal data. However, we would like to point out that in that case there may be disruptions in the services we provide to you and that the service offered may not be fully functional.

We note that you are responsible for the accuracy and currency of the personal data you send us; and if you share the personal data of other people with us, it will be understood that you have obtained from the third party concerned all the permissions required for us to collect, process, use and disclose the information belonging to them, and our Company cannot be held liable in this respect.

OUR PRINCIPLES FOR PROCESSING PERSONAL DATA

All personal data processed by our Company is processed only in accordance with the procedures and principles laid down in the Law and in other laws. Pursuant to Article 4 of the KVKK, the basic principles we observe when processing your personal data are as follows:

Being processed lawfully and in accordance with the rules of good faith.
Being accurate and, where necessary, up to date.
Being processed for specific, explicit and legitimate purposes.
Being relevant, limited and proportionate to the purposes for which they are processed.
Being retained for the period stipulated in the relevant legislation or required for the purpose for which they are processed.

CATEGORIES OF DATA SUBJECTS

A separate policy applies to the processing of the personal data of our employees (including interns and subcontractor employees) whose personal data are processed by our Company. Data subjects other than employees, such as customers, potential customers, visitors, job candidates/interns and the employees, shareholders and officers of the institutions we cooperate with, may also address their requests to our Company under the KVKK.

PURPOSE OF PROCESSING AND TRANSFERRING PERSONAL DATA

Our Company processes personal data only for the purposes and under the conditions set out in the personal data processing conditions specified in Article 5, paragraph 2 and Article 6, paragraph 3 of Law No. 6698 on the Protection of Personal Data. Personal data may be processed where at least one of the items listed below is present:

The existence of the explicit consent of the data subject,
Being expressly provided for by law,
Being necessary for the protection of the life or physical integrity of the person himself or herself or of another person, where that person is unable to give consent due to actual impossibility or whose consent is not deemed legally valid,
Being necessary to process the personal data of the parties to a contract, provided that it is directly related to the conclusion or performance of that contract,
Being mandatory for the data controller to fulfil its legal obligation,
Having been made public by the data subject,
Being mandatory for the establishment, exercise or protection of a right,
Being mandatory for the legitimate interests of the data controller, provided that it does not harm the fundamental rights and freedoms of the data subject.

Under the conditions stated above, our Company may process personal data for the following purposes:

Evaluating potential suppliers/business partners,
Establishing and managing customer relations,
Conducting and concluding the contract process with our suppliers/business partners,
Conducting direct marketing processes,
Communication and support (upon your request),
Compliance with legal obligations,
Protecting the interests of the Company and ensuring its security,
Planning and carrying out the Company's commercial activities,
Reporting and auditing,
Protection of rights and interests.

We share your Personal Data with other parties, including professional advisers such as those listed below:

We share your personal data and your special categories of personal data, within the framework of legal grounds and your consent and within the scope of the personal data processing purposes stated above, with public institutions and organisations, banks, insurance companies, auditors, lawyers, accountants, other external professional advisers, the Joint Health and Safety Unit for the purpose of fulfilling occupational health and safety obligations, law enforcement authorities in line with our legal obligations, domestic and foreign service providers from which we receive services within the scope of marketing activities where consent has been given, and our contracted workplace physician.

WHEN DO WE COLLECT PERSONAL DATA ABOUT YOU?

We collect your personal data in the following cases:

When you visit our Company, or purchase or use our products and services,
If you are a natural or legal person purchasing goods and services from our Company,
When you sell us goods or provide us with services,
When you choose to receive our marketing communications,
When you contact us through our website, e-mail, social media platforms, other online channels or by telephone,
When you take part in our company events, social responsibility projects and organisations,
When you contact us for any purpose as a potential customer, supplier, business partner or subcontractor,
If you have applied for a job with our Company in any way or have made your CV and related information available for our Company's review.

We will process the personal data we obtain in the above cases only in accordance with this Notice.

WHICH OF YOUR PERSONAL DATA DO WE PROCESS?

Our personal data processing methods operate through our website, by telephone or e-mail, through electronic applications specific to our customers, through your participation in our business events and surveys, or through your interaction with us in any other way. In this context, the categories of personal data we process about you are as follows:

Identity information
Contact information
Images and/or videos that may identify you
Financial data
Any other information you decide to share with our Company of your own accord
Automatically collected electronic data
Legal transaction and compliance information
Corporate customer/Supplier data
Incident management and security information
Personal data collected from other sources

ON WHICH LEGAL GROUNDS DO WE PROCESS YOUR PERSONAL DATA?

Personal data is collected, used, recorded, stored and processed by our Company by providing data subjects with clear and comprehensible written information and, where necessary, obtaining their explicit consent, lawfully and in accordance with the rules of good faith, in a manner connected with and limited to the legitimate purpose clearly stated above, and within the framework of the principle of proportionality.

We process your personal data in line with the following legal grounds, which are set out in Article 5 of the KVKK and also appear under the heading "Purpose of Processing and Transferring Personal Data" of this policy, in particular the Turkish Commercial Code No. 6102, the Turkish Code of Obligations No. 6098, the Tax Procedure Law No. 213 and electronic commerce legislation:

The existence of the explicit consent of the data subject,
Being expressly provided for by law,
Being necessary for the protection of the life or physical integrity of the person himself or herself or of another person, where that person is unable to give consent due to actual impossibility or whose consent is not deemed legally valid,
Being necessary to process the personal data of the parties to a contract, provided that it is directly related to the conclusion or performance of that contract,
Being mandatory for the data controller to fulfil its legal obligation,
Having been made public by the data subject,
Being mandatory for the establishment, exercise or protection of a right,
Being mandatory for the legitimate interests of the data controller, provided that it does not harm the fundamental rights and freedoms of the data subject.

Where your Personal Data is processed on the basis of explicit consent, we would like to point out that if you withdraw your explicit consent, you will be removed from the commercial membership programme for which the processing based on that explicit consent is necessary, and that as of the relevant date you will no longer be able to benefit from the advantages you enjoyed through such processing.

RETENTION AND DESTRUCTION PERIODS FOR PERSONAL DATA

Your personal data will be stored for the retention periods specified in the relevant legislation or for as long as the processing purposes mentioned above require. At the end of this period, the data will be deleted, destroyed or anonymised in full compliance with the KVKK. In this context, a Personal Data Retention and Destruction Policy and the related procedures have been prepared and are applied.

HOW DO WE PROTECT YOUR PERSONAL DATA?

In order to protect your personal data and to prevent unlawful access to it, our Company takes the necessary administrative and technical measures in line with the Personal Data Security Guide published by the Personal Data Protection Authority, draws up internal procedures, prepares disclosure and explicit consent texts and, pursuant to Article 12/3 of the KVKK, carries out, or has carried out through external services, the audits necessary to ensure the implementation of the provisions of the KVKK.

WHAT ARE YOUR RIGHTS REGARDING YOUR PERSONAL DATA?

Pursuant to Article 11 of the KVKK, everyone has the following rights concerning themselves by applying to the data controller:

To learn whether personal data is processed,
To request information if personal data has been processed,
To learn the purpose of processing personal data and whether it is used in accordance with that purpose,
To know the third parties to whom personal data is transferred in Turkey or abroad,
To request the correction of personal data if it has been processed incompletely or incorrectly,
To request the deletion or destruction of personal data within the framework of the conditions set out in Article 7 of the KVKK,
To request that the operations carried out pursuant to subparagraphs (d) and (e) be notified to the third parties to whom the personal data has been transferred,
To object to a result arising against the person themselves through the analysis of the processed data exclusively by automated systems,
To request compensation for the damage suffered in the event of damage due to the unlawful processing of personal data.

TO MAKE A REQUEST UNDER THE PERSONAL DATA PROTECTION LAW

To obtain more detailed information about your Personal Data, you can access the information request application form from our company's website at https://www.foxbau.com/ and from the address Organize Sanayi Bölgesi 1. Kısım 7. Cadde No:6 Döşemealtı – Antalya / TÜRKİYE in person.

So that we can respond to your requests regarding your Personal Data as quickly as possible, your requests and questions must be submitted clearly, comprehensibly and with a specific date.

Primer