Colour Palette

Packaging

30 kg

20 kg

10 kg

TDS

Product Description

FOX ULTRASEAL®-UV FS485 is a cement and acrylic-based, two-component, UV-resistant, super-flexible waterproofing material that forms an effective barrier against water-borne salts and atmospheric gases. It meets the requirements of TS EN 1504-2/Principle 2.2 and 8.2. Applied at a minimum dry film thickness of 2 mm, it provides water impermeability up to 7 bar pressure in the positive direction. It can be used on horizontal/vertical surfaces in interior and exterior areas, UV-exposed terraces, water tanks, pools and wet rooms. Applied in two or three coats by brush or spray machine.

Advantages

Resistant to UV radiation.
Excellent adhesion properties.
Easy to prepare and apply.
Can be applied by brush or spray machine.
Long working time.
Resistant to light pedestrian traffic on terraces.
Resistant to freeze-thaw cycles.
Resistant to carbon dioxide and chlorine in atmospheric conditions.

Property	Value
Material Composition – Component A	Special cement, Mineral fillers
Material Composition – Component B	Liquid Polymer Dispersion
Colour	White
Mortar Density	1,50±0,05 kg/lt
Adhesion Strength by Pull-Off Method (EN 1542)	≥0,8 N/mm²
Capillary Water Absorption and Water Permeability (EN 1062-3)	w<0,1 kg/m².h⁰·⁵
Water Vapour Permeability (EN ISO 7783)	Class III
Resistance to Water Under Pressure (at 2 mm dry film thickness)	7 bar (Positive)
Application Substrate Temperature	+5°C / +30°C
Service Temperature	-20°C / +80°C
Pot Life	~2 hours
Maturation Time	3-5 minutes
Minimum Application Thickness	≥2 mm
Ready for Use – Mechanical Strength	After 2 days
Ready for Use – Water Impermeability	After 7 days
Overcoating – Plaster	After 3 days
Overcoating – Ceramic etc.	After 3 days

Usage Areas

Interior and exterior applications, horizontal and vertical surfaces
UV-exposed terraces
Drinking water tanks
Water tanks
Wet areas such as bathrooms, balconies and kitchens
Olympic swimming pools
Spaces such as Turkish baths, saunas and spas

Application Steps

1
Surface Preparation
The surface to be treated must be sound and free from oil, grease, rust, paraffin, paint and bitumen residues that would impair adhesion, and all loose particles must be removed. Iron and wooden plugs on the surface must be removed, and active water leaks must be plugged with FOX PLUG FC340. Existing voids, uneven surfaces and corner edges (chamfer of at least 4 cm) must be repaired with FOX MORTAR FC188 T repair mortar.
2
Mixing
Half of the FOX ULTRASEAL®-UV FS485 Component B is poured into a clean mixing container. Component A is added slowly while mixing with an electric mixer at 400–600 rpm for 2–3 minutes. The mixture, which reaches a paste consistency, is left to mature for 3–5 minutes; then the remaining Component B is added and mixed for a further 1–2 minutes. Mixing ratio: 20 kg Component A + 10 kg Component B.
3
Application
The surface must be dampened before application. The prepared mixture is applied in two or three coats using a waterproofing brush or spray machine to achieve a minimum dry film thickness of 2 mm. The direction of brush application must be perpendicular between successive coats. The waiting time between coats is determined according to ambient conditions. FOX PROMAT 69 (alkali-resistant glass textile mesh) must be used where required. FOX TRIPLETAPE 120 chamfer tape must be applied to corner joints.
4
Tool Cleaning
Tools and equipment used must be cleaned with water immediately after application. Once FOX ULTRASEAL®-UV FS485 has hardened, it can only be removed by mechanical means.

Critical

Application should not be carried out if the ambient and surface temperature is below +5°C or above +30°C; suitable temperatures must be awaited.

Critical

Application should not be carried out in extremely hot, rainy or windy weather.

Critical

For exterior surface applications, the surface must be protected from sunlight, wind, rain or frost for the first 24 hours.

Critical

The wet film thickness in a single coat must not exceed 1.30 mm.

Critical

For the material to complete its curing, the ambient and substrate temperature must not fall below the permitted minimum temperature.

Important

FOX ULTRASEAL®-UV FS485 applied at +23°C gains mechanical strength after 3 days, becomes water-impermeable after 7 days, and reaches its final strength after 28 days.

Important

FOX TRIPLETAPE 120 chamfer tape must be applied to corner joints in the application area. Where chamfer tape is not available, after forming a corner chamfer, FOX PROMAT 69 (alkali-resistant glass textile mesh) 20 cm wide must be placed at the corners.

Important

Areas that need to be walked on must be covered with a screed containing FOX BINDER FM125 additive.

Information

The working and reaction times of cement and acrylic-based systems are affected by ambient and substrate temperature and relative humidity. Reaction slows at low temperatures and accelerates at high temperatures.

Important

The product must be stored in its original unopened packaging, in a dry and cool environment (between +5°C and +30°C), protected from sunlight and frost. Component B freezes below 0°C.

Important

When the specified storage conditions are observed, the shelf life is 12 months from the date of manufacture. Opened packaging must be consumed within 1 week.

Critical

Approaching storage and application areas with open flame is dangerous. Storage and application areas must be ventilated.

Critical

Appropriate work clothing, protective gloves, goggles and a mask must be worn during application in accordance with occupational health and safety regulations. Contact with skin and eyes must be avoided; in case of contact, wash immediately with plenty of water and soap; if swallowed, seek medical attention immediately.

Important

Food and beverages must not be brought into application areas. Must be stored out of reach of children.

Information

When covering with ceramic, marble or similar products, the use of INNO-FIX series ceramic adhesives is recommended.

Related Products

OUR PRINCIPLES FOR PROCESSING PERSONAL DATA

All personal data processed by our Company is processed only in accordance with the procedures and principles laid down in the Law and in other laws. Pursuant to Article 4 of the KVKK, the basic principles we observe when processing your personal data are as follows:

Being processed lawfully and in accordance with the rules of good faith.
Being accurate and, where necessary, up to date.
Being processed for specific, explicit and legitimate purposes.
Being relevant, limited and proportionate to the purposes for which they are processed.
Being retained for the period stipulated in the relevant legislation or required for the purpose for which they are processed.

CATEGORIES OF DATA SUBJECTS

A separate policy applies to the processing of the personal data of our employees (including interns and subcontractor employees) whose personal data are processed by our Company. Data subjects other than employees, such as customers, potential customers, visitors, job candidates/interns and the employees, shareholders and officers of the institutions we cooperate with, may also address their requests to our Company under the KVKK.

PURPOSE OF PROCESSING AND TRANSFERRING PERSONAL DATA

Our Company processes personal data only for the purposes and under the conditions set out in the personal data processing conditions specified in Article 5, paragraph 2 and Article 6, paragraph 3 of Law No. 6698 on the Protection of Personal Data. Personal data may be processed where at least one of the items listed below is present:

The existence of the explicit consent of the data subject,
Being expressly provided for by law,
Being necessary for the protection of the life or physical integrity of the person himself or herself or of another person, where that person is unable to give consent due to actual impossibility or whose consent is not deemed legally valid,
Being necessary to process the personal data of the parties to a contract, provided that it is directly related to the conclusion or performance of that contract,
Being mandatory for the data controller to fulfil its legal obligation,
Having been made public by the data subject,
Being mandatory for the establishment, exercise or protection of a right,
Being mandatory for the legitimate interests of the data controller, provided that it does not harm the fundamental rights and freedoms of the data subject.

Under the conditions stated above, our Company may process personal data for the following purposes:

Evaluating potential suppliers/business partners,
Establishing and managing customer relations,
Conducting and concluding the contract process with our suppliers/business partners,
Conducting direct marketing processes,
Communication and support (upon your request),
Compliance with legal obligations,
Protecting the interests of the Company and ensuring its security,
Planning and carrying out the Company's commercial activities,
Reporting and auditing,
Protection of rights and interests.

We share your Personal Data with other parties, including professional advisers such as those listed below:

We share your personal data and your special categories of personal data, within the framework of legal grounds and your consent and within the scope of the personal data processing purposes stated above, with public institutions and organisations, banks, insurance companies, auditors, lawyers, accountants, other external professional advisers, the Joint Health and Safety Unit for the purpose of fulfilling occupational health and safety obligations, law enforcement authorities in line with our legal obligations, domestic and foreign service providers from which we receive services within the scope of marketing activities where consent has been given, and our contracted workplace physician.

WHEN DO WE COLLECT PERSONAL DATA ABOUT YOU?

We collect your personal data in the following cases:

When you visit our Company, or purchase or use our products and services,
If you are a natural or legal person purchasing goods and services from our Company,
When you sell us goods or provide us with services,
When you choose to receive our marketing communications,
When you contact us through our website, e-mail, social media platforms, other online channels or by telephone,
When you take part in our company events, social responsibility projects and organisations,
When you contact us for any purpose as a potential customer, supplier, business partner or subcontractor,
If you have applied for a job with our Company in any way or have made your CV and related information available for our Company's review.

We will process the personal data we obtain in the above cases only in accordance with this Notice.

WHICH OF YOUR PERSONAL DATA DO WE PROCESS?

Our personal data processing methods operate through our website, by telephone or e-mail, through electronic applications specific to our customers, through your participation in our business events and surveys, or through your interaction with us in any other way. In this context, the categories of personal data we process about you are as follows:

Identity information
Contact information
Images and/or videos that may identify you
Financial data
Any other information you decide to share with our Company of your own accord
Automatically collected electronic data
Legal transaction and compliance information
Corporate customer/Supplier data
Incident management and security information
Personal data collected from other sources

ON WHICH LEGAL GROUNDS DO WE PROCESS YOUR PERSONAL DATA?

Personal data is collected, used, recorded, stored and processed by our Company by providing data subjects with clear and comprehensible written information and, where necessary, obtaining their explicit consent, lawfully and in accordance with the rules of good faith, in a manner connected with and limited to the legitimate purpose clearly stated above, and within the framework of the principle of proportionality.

We process your personal data in line with the following legal grounds, which are set out in Article 5 of the KVKK and also appear under the heading "Purpose of Processing and Transferring Personal Data" of this policy, in particular the Turkish Commercial Code No. 6102, the Turkish Code of Obligations No. 6098, the Tax Procedure Law No. 213 and electronic commerce legislation:

The existence of the explicit consent of the data subject,
Being expressly provided for by law,
Being necessary for the protection of the life or physical integrity of the person himself or herself or of another person, where that person is unable to give consent due to actual impossibility or whose consent is not deemed legally valid,
Being necessary to process the personal data of the parties to a contract, provided that it is directly related to the conclusion or performance of that contract,
Being mandatory for the data controller to fulfil its legal obligation,
Having been made public by the data subject,
Being mandatory for the establishment, exercise or protection of a right,
Being mandatory for the legitimate interests of the data controller, provided that it does not harm the fundamental rights and freedoms of the data subject.

Where your Personal Data is processed on the basis of explicit consent, we would like to point out that if you withdraw your explicit consent, you will be removed from the commercial membership programme for which the processing based on that explicit consent is necessary, and that as of the relevant date you will no longer be able to benefit from the advantages you enjoyed through such processing.

RETENTION AND DESTRUCTION PERIODS FOR PERSONAL DATA

Your personal data will be stored for the retention periods specified in the relevant legislation or for as long as the processing purposes mentioned above require. At the end of this period, the data will be deleted, destroyed or anonymised in full compliance with the KVKK. In this context, a Personal Data Retention and Destruction Policy and the related procedures have been prepared and are applied.

HOW DO WE PROTECT YOUR PERSONAL DATA?

In order to protect your personal data and to prevent unlawful access to it, our Company takes the necessary administrative and technical measures in line with the Personal Data Security Guide published by the Personal Data Protection Authority, draws up internal procedures, prepares disclosure and explicit consent texts and, pursuant to Article 12/3 of the KVKK, carries out, or has carried out through external services, the audits necessary to ensure the implementation of the provisions of the KVKK.

WHAT ARE YOUR RIGHTS REGARDING YOUR PERSONAL DATA?

Pursuant to Article 11 of the KVKK, everyone has the following rights concerning themselves by applying to the data controller:

To learn whether personal data is processed,
To request information if personal data has been processed,
To learn the purpose of processing personal data and whether it is used in accordance with that purpose,
To know the third parties to whom personal data is transferred in Turkey or abroad,
To request the correction of personal data if it has been processed incompletely or incorrectly,
To request the deletion or destruction of personal data within the framework of the conditions set out in Article 7 of the KVKK,
To request that the operations carried out pursuant to subparagraphs (d) and (e) be notified to the third parties to whom the personal data has been transferred,
To object to a result arising against the person themselves through the analysis of the processed data exclusively by automated systems,
To request compensation for the damage suffered in the event of damage due to the unlawful processing of personal data.

TO MAKE A REQUEST UNDER THE PERSONAL DATA PROTECTION LAW

To obtain more detailed information about your Personal Data, you can access the information request application form from our company's website at https://www.foxbau.com/ and from the address Organize Sanayi Bölgesi 1. Kısım 7. Cadde No:6 Döşemealtı – Antalya / TÜRKİYE in person.

So that we can respond to your requests regarding your Personal Data as quickly as possible, your requests and questions must be submitted clearly, comprehensibly and with a specific date.

FOX ULTRASEAL®-UV FS485

Product Description

Advantages

Usage Areas

Application Steps

Surface Preparation

Mixing

Application

Tool Cleaning

Related Products