FOX MONOTAPE 120/70 is a thermoplastic elastomer-based joint waterproofing tape and accessories used for sealing and waterproofing expansion joints, featuring an elastic rubber centre and polyester mesh edges, with a thickness of 0.67 mm.
Colour Palette
Packaging
50 m
Product Description
FOX MONOTAPE 120/70 is a thermoplastic elastomer-based joint waterproofing tape used for sealing and waterproofing expansion joints. The tape features an elastic rubber centre and polyester mesh edges, with a thickness of 0.67 mm and a total width of 120 mm (70 mm coverage width). Thanks to its water and air impermeability, it can be safely used in wet areas, swimming pools, water tanks, and treatment plants, as well as in any structural section requiring expansion joint and crack waterproofing. The white tape operates across a wide temperature range of -30°C to +90°C and offers high resistance to UV, ozone, acid, and alkali effects. Its perforations also allow mechanical fixing when applied together with waterproofing materials.
Advantages
- Fast and easy to apply.
- Compatible with all types of building materials.
- Waterproof and airtight.
- Resistant to harsh weather conditions, ozone, and UV effects.
- Continuously elastic; resistant to all types of movement and stress in structures and structural elements.
- Odourless and highly resistant to chemicals.
- Unaffected by ambient temperatures.
- Perforations allow easy mechanical fixing.
Usage Areas
- In wet areas
- In swimming pools
- In water tanks
- In treatment plants
- On balconies
- On parapets
- For waterproofing cold joints and cracks in floors and curtain walls
Application Steps
- 1
Surface Preparation
The inner and outer surfaces of the joints where FOX MONOTAPE 120/70 is to be applied must be sound and free from any oil, grease, rust, paraffin, paint, and bitumen residues that could impair adhesion; all loose particles must be removed. Surface defects must be repaired with FOX MORTAR FC188 T.
- 2
First Coat Waterproofing
The first coat of the preferred waterproofing material is applied over the joint.
- 3
Tape Placement
FOX MONOTAPE 120/70 is placed onto the applied waterproofing material and embedded within it. The polyester mesh sections are pressed firmly with a brush and thoroughly covered with the waterproofing material.
- 4
Application of Final Coats
After the first coat of waterproofing has cured, the remaining coats are applied to complete the process.
Critical
FOX MONOTAPE 120/70 must be embedded within wet waterproofing materials.
Critical
Sharp, piercing, and hard tools must not be used.
Important
After the tape has been applied, waterproofing materials must be brought over FOX MONOTAPE 120/70.
Important
Store in original unopened packaging in a cool, dry environment, protected from frost.
Important
For short-term storage, pallets must not be stacked more than 2 high and shipment must follow a first-in, first-out system. For long-term storage, pallets must not be stacked on top of each other.
Critical
Approaching storage and application areas with open flame is dangerous; these areas must be ventilated.
Important
During application, appropriate work clothing, protective gloves, goggles, and a mask must be worn in accordance with occupational health and safety regulations.
Critical
During storage and application, avoid contact with skin and eyes; in case of contact, wash immediately with plenty of water and soap; if swallowed, seek medical attention immediately.
Important
Food and beverages must not be brought into application areas. Store out of reach of children.
Information
The technical values above are given at +23°C and 50% relative humidity. Higher temperatures shorten the time; lower temperatures extend it.
Related Products
Similar products to this item
