FOX INOVA MATT is a stain-resistant, washable, styrene-acrylic binder-based, water-borne, matt, decorative interior wall paint. With its low odour, eco-friendly formulation and ease of application, it offers superior aesthetics and durability on interior surfaces.

Colour Palette

B1 – White/Pastel BaseB2 – Medium Tone BaseB3 – Transparent/Deep Tone Base

Packaging

10 L

12.5 L

TDS

Product Description

FOX INOVA MATT is a water-borne, matt interior wall paint containing a styrene-acrylic binder. Its stain-resistant and washable properties make it suitable for heavily used living spaces such as living rooms and bedrooms. According to EN 13300, it has a G4 (Dead Matt) sheen class, Class 2 wet scrub resistance and Class 3 hiding power. With a density of 1.58 gr/cm³, the product is touch-dry in 15 minutes and fully cured in 6 hours at +23°C and 50% relative humidity. It is available in three different base options: B1 (White/Pastel), B2 (Medium Tone) and B3 (Transparent/Deep Tone).

Advantages

Easy to apply.
Spreads well on surfaces.
Provides good hiding power.
Allows the surface to breathe.
Does not splatter or drip.
Environmentally friendly.
Low odour.
Washable.

Property	Value
Density	1,58 gr/cm³
Colour Range	B1, B2, B3
Sheen (EN 13300)	G4 Dead Matt
Wet Scrub Resistance (EN 13300)	Class 2
Hiding Power (EN 13300)	Class 3
Touch Dry	15 minutes
Full Cure	6 hours
Application Temperature	+5°C / +30°C
Maximum Dilution Ratio	15% water
Shelf Life	12 months (unopened, in a cool and dry environment)

Usage Areas

On interior plasters
On concrete surfaces
On interior walls
In living spaces such as living rooms and bedrooms

Application Steps

1
Surface Preparation
The surface to be coated must be free of loose particles and all residues that could reduce adhesion, such as oil, grease and dirt. The surface to be coated may be damp or dry. If there are any flaking areas on painted surfaces, they should be levelled using a repair mortar such as FOX FASTMORTAR FC245 or FOX BASEMOR FC205.
2
Priming
On old mineral plaster and concrete surfaces: slightly absorbent, smooth surfaces should be primed with FOX DECODUR PRIMER; porous, absorbent, slightly sandy surfaces should be primed with FOX PRIMERA® FL220. On old matt coatings: moderately absorbent surfaces should be primed with FOX DECODUR PRIMER diluted with max. 3% water; porous, absorbent surfaces should be primed with FOX PRIMERA® FL220 diluted 1:1 with water. Glossy surfaces should be primed with FOX UNIPRIMER FL555. Plastered surfaces and surfaces after wallpaper removal should be primed with FOX PRIMERA® FL220 diluted 1:1 with water. Mouldy, damp and heavily soiled surfaces should be primed with FOX INOVA MS BARRIER.
3
Mixing
FOX INOVA MATT should be mixed with an electric mixer at 400–600 rpm before use.
4
Dilution
FOX INOVA MATT can be diluted by adding a maximum of 15% water.
5
Application
At least 6 hours after priming the surface, FOX INOVA MATT is applied with a suitable roller or spray machine. A brush is recommended for painting corners and edges. After the first coat has dried (min. 6 hours), a second coat is applied using the same method.
6
Cleaning of Tools
After application, tools and equipment used should be cleaned with water.

Important

To prevent lap marks and overlaps, application must be carried out wet-on-wet in a single pass.

Critical

During and after application, the surface must be protected from all external influences such as rain, water and mechanical impact for 24 hours.

Important

When taking breaks during the day, packaging lids must always be closed.

Critical

Rooms where application is carried out must be well ventilated. A mask, gloves and protective goggles must be worn during application.

Critical

No paint should be applied to dirty or damp surfaces. The surface must be prepared according to the type of paint to be applied.

Critical

Paints must not be applied in very hot or very cold conditions. The recommended air and surface application temperature is between +5°C and +30°C.

Important

When cleaning stains on walls, the entire wall must be wiped down, not just the stained area. Cleaning only the stained section may cause localised sheen differences on the surface.

Critical

For new cement-plastered or bare concrete surfaces being painted for the first time, the earliest application should be made after 28 days.

Important

The dilution ratios stated on the product label must be observed. Over-diluting the product causes hiding power, roller mark and waviness problems. Under-diluting creates the risk of thick application; cracks may occur in thickly applied paint.

Critical

No powder or liquid additives should be added to the paint, and it must not be diluted beyond the dilution ratio stated on the packaging.

Important

During paint application, cutting-in at doors, windows and ceiling-wall junctions should be done first, followed immediately by roller application without interruption.

Critical

It is dangerous to approach storage and application areas with open flames. These areas must be ventilated.

Critical

The product must not come into contact with skin or eyes. In case of contact, wash thoroughly with soap and water. If swallowed, seek medical attention immediately. Keep out of reach of children.

Important

In unopened packaging, the product can be stored for 12 months in a cool, dry place, protected from frost and direct sunlight.

Related Products

OUR PRINCIPLES FOR PROCESSING PERSONAL DATA

All personal data processed by our Company is processed only in accordance with the procedures and principles laid down in the Law and in other laws. Pursuant to Article 4 of the KVKK, the basic principles we observe when processing your personal data are as follows:

Being processed lawfully and in accordance with the rules of good faith.
Being accurate and, where necessary, up to date.
Being processed for specific, explicit and legitimate purposes.
Being relevant, limited and proportionate to the purposes for which they are processed.
Being retained for the period stipulated in the relevant legislation or required for the purpose for which they are processed.

CATEGORIES OF DATA SUBJECTS

A separate policy applies to the processing of the personal data of our employees (including interns and subcontractor employees) whose personal data are processed by our Company. Data subjects other than employees, such as customers, potential customers, visitors, job candidates/interns and the employees, shareholders and officers of the institutions we cooperate with, may also address their requests to our Company under the KVKK.

PURPOSE OF PROCESSING AND TRANSFERRING PERSONAL DATA

Our Company processes personal data only for the purposes and under the conditions set out in the personal data processing conditions specified in Article 5, paragraph 2 and Article 6, paragraph 3 of Law No. 6698 on the Protection of Personal Data. Personal data may be processed where at least one of the items listed below is present:

The existence of the explicit consent of the data subject,
Being expressly provided for by law,
Being necessary for the protection of the life or physical integrity of the person himself or herself or of another person, where that person is unable to give consent due to actual impossibility or whose consent is not deemed legally valid,
Being necessary to process the personal data of the parties to a contract, provided that it is directly related to the conclusion or performance of that contract,
Being mandatory for the data controller to fulfil its legal obligation,
Having been made public by the data subject,
Being mandatory for the establishment, exercise or protection of a right,
Being mandatory for the legitimate interests of the data controller, provided that it does not harm the fundamental rights and freedoms of the data subject.

Under the conditions stated above, our Company may process personal data for the following purposes:

Evaluating potential suppliers/business partners,
Establishing and managing customer relations,
Conducting and concluding the contract process with our suppliers/business partners,
Conducting direct marketing processes,
Communication and support (upon your request),
Compliance with legal obligations,
Protecting the interests of the Company and ensuring its security,
Planning and carrying out the Company's commercial activities,
Reporting and auditing,
Protection of rights and interests.

We share your Personal Data with other parties, including professional advisers such as those listed below:

We share your personal data and your special categories of personal data, within the framework of legal grounds and your consent and within the scope of the personal data processing purposes stated above, with public institutions and organisations, banks, insurance companies, auditors, lawyers, accountants, other external professional advisers, the Joint Health and Safety Unit for the purpose of fulfilling occupational health and safety obligations, law enforcement authorities in line with our legal obligations, domestic and foreign service providers from which we receive services within the scope of marketing activities where consent has been given, and our contracted workplace physician.

WHEN DO WE COLLECT PERSONAL DATA ABOUT YOU?

We collect your personal data in the following cases:

When you visit our Company, or purchase or use our products and services,
If you are a natural or legal person purchasing goods and services from our Company,
When you sell us goods or provide us with services,
When you choose to receive our marketing communications,
When you contact us through our website, e-mail, social media platforms, other online channels or by telephone,
When you take part in our company events, social responsibility projects and organisations,
When you contact us for any purpose as a potential customer, supplier, business partner or subcontractor,
If you have applied for a job with our Company in any way or have made your CV and related information available for our Company's review.

We will process the personal data we obtain in the above cases only in accordance with this Notice.

WHICH OF YOUR PERSONAL DATA DO WE PROCESS?

Our personal data processing methods operate through our website, by telephone or e-mail, through electronic applications specific to our customers, through your participation in our business events and surveys, or through your interaction with us in any other way. In this context, the categories of personal data we process about you are as follows:

Identity information
Contact information
Images and/or videos that may identify you
Financial data
Any other information you decide to share with our Company of your own accord
Automatically collected electronic data
Legal transaction and compliance information
Corporate customer/Supplier data
Incident management and security information
Personal data collected from other sources

ON WHICH LEGAL GROUNDS DO WE PROCESS YOUR PERSONAL DATA?

Personal data is collected, used, recorded, stored and processed by our Company by providing data subjects with clear and comprehensible written information and, where necessary, obtaining their explicit consent, lawfully and in accordance with the rules of good faith, in a manner connected with and limited to the legitimate purpose clearly stated above, and within the framework of the principle of proportionality.

We process your personal data in line with the following legal grounds, which are set out in Article 5 of the KVKK and also appear under the heading "Purpose of Processing and Transferring Personal Data" of this policy, in particular the Turkish Commercial Code No. 6102, the Turkish Code of Obligations No. 6098, the Tax Procedure Law No. 213 and electronic commerce legislation:

The existence of the explicit consent of the data subject,
Being expressly provided for by law,
Being necessary for the protection of the life or physical integrity of the person himself or herself or of another person, where that person is unable to give consent due to actual impossibility or whose consent is not deemed legally valid,
Being necessary to process the personal data of the parties to a contract, provided that it is directly related to the conclusion or performance of that contract,
Being mandatory for the data controller to fulfil its legal obligation,
Having been made public by the data subject,
Being mandatory for the establishment, exercise or protection of a right,
Being mandatory for the legitimate interests of the data controller, provided that it does not harm the fundamental rights and freedoms of the data subject.

Where your Personal Data is processed on the basis of explicit consent, we would like to point out that if you withdraw your explicit consent, you will be removed from the commercial membership programme for which the processing based on that explicit consent is necessary, and that as of the relevant date you will no longer be able to benefit from the advantages you enjoyed through such processing.

RETENTION AND DESTRUCTION PERIODS FOR PERSONAL DATA

Your personal data will be stored for the retention periods specified in the relevant legislation or for as long as the processing purposes mentioned above require. At the end of this period, the data will be deleted, destroyed or anonymised in full compliance with the KVKK. In this context, a Personal Data Retention and Destruction Policy and the related procedures have been prepared and are applied.

HOW DO WE PROTECT YOUR PERSONAL DATA?

In order to protect your personal data and to prevent unlawful access to it, our Company takes the necessary administrative and technical measures in line with the Personal Data Security Guide published by the Personal Data Protection Authority, draws up internal procedures, prepares disclosure and explicit consent texts and, pursuant to Article 12/3 of the KVKK, carries out, or has carried out through external services, the audits necessary to ensure the implementation of the provisions of the KVKK.

WHAT ARE YOUR RIGHTS REGARDING YOUR PERSONAL DATA?

Pursuant to Article 11 of the KVKK, everyone has the following rights concerning themselves by applying to the data controller:

To learn whether personal data is processed,
To request information if personal data has been processed,
To learn the purpose of processing personal data and whether it is used in accordance with that purpose,
To know the third parties to whom personal data is transferred in Turkey or abroad,
To request the correction of personal data if it has been processed incompletely or incorrectly,
To request the deletion or destruction of personal data within the framework of the conditions set out in Article 7 of the KVKK,
To request that the operations carried out pursuant to subparagraphs (d) and (e) be notified to the third parties to whom the personal data has been transferred,
To object to a result arising against the person themselves through the analysis of the processed data exclusively by automated systems,
To request compensation for the damage suffered in the event of damage due to the unlawful processing of personal data.

TO MAKE A REQUEST UNDER THE PERSONAL DATA PROTECTION LAW

To obtain more detailed information about your Personal Data, you can access the information request application form from our company's website at https://www.foxbau.com/ and from the address Organize Sanayi Bölgesi 1. Kısım 7. Cadde No:6 Döşemealtı – Antalya / TÜRKİYE in person.

So that we can respond to your requests regarding your Personal Data as quickly as possible, your requests and questions must be submitted clearly, comprehensibly and with a specific date.

FOX INOVA MATT

Product Description

Advantages

Usage Areas

Application Steps

Surface Preparation

Priming

Mixing

Dilution

Application

Cleaning of Tools

Related Products