FOX ALL IN ONE is a water-based, pure acrylic, multi-purpose next-generation transformation paint suitable for all surfaces. It requires no primer; its ready-to-use formula allows easy application to ceramic, wood, metal, plastic and painted surfaces both indoors and outdoors.
Colour Palette
Packaging
1 L
Product Description
FOX ALL IN ONE is a water-based, pure acrylic, multi-purpose next-generation transformation paint suitable for all surfaces. It can be applied directly to many different surfaces — including ceramic, tile, wood, plastic, metal and painted surfaces — without the need for a primer. It can be used in kitchens, bathrooms, on furniture, doors and windows. With a density of 1.20 g/cm³, the product falls within the EN 13300 G2a Medium Gloss sheen class. Touch-dry time is 20 minutes and full cure is 7 hours (at +23°C, 50% relative humidity). Its eco-friendly formula has no unpleasant odour, making it safe for use in enclosed spaces. Applied in 2 coats by roller or brush; the minimum recoat time between coats is 7 hours.
Advantages
- Ready to use.
- Easy to apply.
- No primer required.
- Excellent coverage.
- High chemical resistance.
- High stain resistance.
- High scratch resistance.
- No spattering or dripping.
- Does not yellow.
- Environmentally friendly.
- No unpleasant odour.
- Washable.
Usage Areas
- Indoors and outdoors
- Ceramic and tile surfaces
- Wood surfaces
- Plastic surfaces
- Metal surfaces
- Painted surfaces
- Kitchens, bathrooms
- Furniture, doors, windows and all other surfaces
Application Steps
- 1
Surface Preparation
The surface to be coated must be clean. There must be no loose particles on the surface; all residues that could reduce adhesion — such as oil, grease, dirt and dust — must be removed. The surface must be free of water and moisture. Chemical residues such as detergent must be cleaned with white vinegar solution. Old painted or excessively glossy surfaces should be lightly sanded to improve adhesion. Loose, blistering or peeling areas must be repaired; unsound coatings must be completely removed.
- 2
Priming
FOX ALL IN ONE is ready to use and does not require a primer.
- 3
Mixing
Before use, stir thoroughly until a homogeneous consistency is achieved.
- 4
Dilution
FOX ALL IN ONE is not diluted; it is a ready-to-use formula.
- 5
Application
Apply 2 coats to the prepared surface by roller or brush. The minimum recoat time between coats is 7 hours. A 3rd coat may be applied if necessary. To prevent lap marks and overlaps, application must be carried out wet-on-wet in a single pass. Applied surfaces should be put into use after 1 day; care must be taken against chemical cleaners, water accumulation and impacts for 7 days.
- 6
Tool Cleaning
After application, tools and equipment used must be cleaned with water.
Critical
The application and storage temperature must be between +5°C and +30°C. Paints must not be applied in very hot or very cold conditions.
Critical
During and after application, the surface must be protected from all external influences — including rain, water and mechanical impact — for 24 hours.
Critical
To prevent lap marks and overlaps, application must be carried out wet-on-wet in a single pass.
Important
Applied surfaces must be handled with care against chemical cleaners, water accumulation and impacts for 7 days.
Critical
No paint should be applied to dirty or damp surfaces.
Important
Contact with hydrochloric acid, undiluted bleach and concentrated acids must be avoided.
Important
Steel wool or metal scouring pads must not be used when wiping.
Important
Container lids must be closed whenever work is interrupted during the day.
Important
Rooms where application is carried out must be well ventilated. A mask, gloves and protective goggles must be worn during application.
Important
In its unopened container, the product can be stored for 12 months in a cool, dry place, protected from frost and direct sunlight.
Critical
During storage and application, contact with skin and eyes must be avoided; if contact occurs, wash immediately with plenty of water and soap; if swallowed, seek medical attention immediately.
Important
Must be stored out of reach of children.
Critical
Approaching storage and application areas with open flames is dangerous; areas must be ventilated.
Related Products
Similar products to this item
