FOX SAGALASSOS STANDART is an acrylic-based, textured, ready-to-use micro-concrete coating material developed for distinctive surfaces. Suitable for use on floors and walls, this product provides a decorative non-slip surface finish in multi-layer systems and offers long-lasting performance in both interior and exterior environments thanks to its UV resistance and waterproofing properties.
Colour Palette
Packaging
15 kg
Product Description
FOX SAGALASSOS STANDART is a textured, ready-to-use micro-concrete coating material containing acrylic binder, mineral fillers and polymer additives. Applicable to floor and wall surfaces, the product is formulated to provide a non-slip surface finish in multi-layer decorative systems.
With a density of 1.74±0.05 g/cm³, it can be applied at ambient and surface temperatures between +5°C and +30°C. Its UV-resistant and waterproof structure makes it suitable for a wide range of applications including pool surrounds, walkways, shops, offices, hotels, restaurants, residential buildings and shopping centres. The fire resistance class has been determined as A2-s1,d0 in accordance with TS EN 13501-1.
Advantages
- Suitable for interior and exterior use.
- Provides non-slip floor coating.
- Gives the space a continuous, seamless appearance.
- Can be applied to any surface and object.
- Resistant to UV radiation.
- Waterproof.
- Available in different colour options.
Usage Areas
- Pool surrounds
- Walkways
- Shops and showrooms
- Offices
- Hotels, restaurants and cafés
- Residential buildings
- Shopping centres
- Museums and galleries
Application Steps
- 1
Surface Preparation
Concrete substrates to be coated must be prepared using abrasive equipment (shot blasting, milling, diamond grinding, etc.) to remove the cement laitance and achieve an open-porous surface. Weak concrete particles must be removed from the surface, and small voids and holes must be fully opened. The resulting dust must be cleaned with an industrial vacuum cleaner.
- 2
Mixing
Before application, the material must be thoroughly mixed until a homogeneous consistency is achieved.
- 3
Horizontal/Vertical Surface Priming – FOX PRIMERA® FL220
The surface must be primed to improve the adhesion of the coating material to the surface, reduce air bubbles and prevent the mixing liquid from being absorbed by the surface. FOX PRIMERA® FL220 is poured onto the cleaned surface and applied uniformly with a brush or roller. The application rate should be adjusted according to the condition of the surface; the consumption should be increased on surfaces with a high risk of adhesion. Ponding on the surface must not be allowed.
- 4
Surface Priming – FOX DECOPRIMER FL204
FOX DECOPRIMER FL204 is applied over FOX PRIMERA® FL220 using a suitable roller. To check readiness for coating, a masking tape is applied after approximately 4 hours; when the tape is removed, there must be no dust on the tape surface.
- 5
Coating Application
Ready-to-use FOX SAGALASSOS STANDART is mixed for approximately 1 minute. The homogeneous mixture is poured onto the surface and spread using a suitable trowel. After the material has dried, the surface is sanded with 60/80 grit sandpaper. Once sanding is complete, dust is removed with a vacuum cleaner and the surface is wiped with a damp cloth. The same process is repeated for the 2nd coat.
- 6
Cleaning of Tools
All tools and equipment used must be cleaned with water before the material dries.
Critical
If the ambient and surface temperature is below +5°C or above +30°C, application must not be carried out; suitable temperatures must be awaited.
Critical
Application must not be carried out in extremely hot, rainy or very windy weather.
Critical
For exterior applications, the surface must be protected from sunlight, rain, wind and frost for the first 24 hours.
Important
High temperatures accelerate hydration and working time is reduced accordingly. Low temperatures slow down hydration and extend working time.
Important
For the material to complete its curing, the floor and ambient temperature must not fall below the permitted minimum temperature.
Important
Store at room temperature, away from direct sunlight, between +5°C and +30°C. Shelf life is 12 months from the date of manufacture. Opened packages must be resealed and consumed within 1 week.
Important
Store in the original unopened packaging in a cool, dry place, protected from frost.
Critical
Avoid contact with skin and eyes during storage and application. In case of contact, wash immediately with plenty of water and soap; if swallowed, seek medical attention immediately.
Important
During application, appropriate work clothing, protective gloves, goggles and a mask must be worn in accordance with occupational health and safety regulations.
Critical
It is dangerous to approach storage and application areas with open flames; these areas must be ventilated.
Important
Food and beverages must not be brought into application areas. Store out of reach of children.
