Sports Flooring is a multi-layer floor coating system with shock absorption, developed for sports halls and play areas. The elastic intermediate layer reduces the joint load on the athlete, while the top coating provides the surface required for ball bounce and slip resistance. The layer thickness determines the shock absorption class and the intended use.
-
1
Primer
Required
Main Product FOX EPOTHANE PRIMER HB~0.3 kg/m²Damp surfaces
Alternative FOX EPOTHANE PRIMER~0.8 kg/m²Dry surfaces
-
2
Waterproofing
Required
Main Product FOX PURMAX ULTRA~1.2 kg/m² -
3
Wear Layer
Required
Main Product FOX PURMAX EP 2K~1.8 kg/m² -
4
Top Coat
Required
Main Product FOX PURATHANE TOPCOAT~0.6 kg/m²Alternative FOX PURATHANE TOPCOAT UV~0.6 kg/m²UV resistant
Product Description
Sports Flooring is designed for areas that require both performance and safety on the same floor. Line and court markings are applied over the top coat; the surface texture is set so that it allows turning movements without reducing shoe grip.
Key Benefits
- High mechanical and chemical resistance
- Easy to clean, dust-free surface
- Long lasting and easy to maintain
- Can be applied in different colour options
Advantages
- Can be used indoors and outdoors.
- It has a long service life.
- It is flexible and resistant to abrasion.
- It has crack covering capability.
- Chemical resistance is high.
- Adhesion strength is high.
- Easy to maintain and clean.
- Provides hygienic environments.
- It is easy to sterilise.
- Contains no volatile organic compounds (VOC-solvent).
- A seamless finish (apart from existing structural joints) is possible.
Technical Specifications
System Detail
Areas of Use
- Sports Halls
- Basketball and Volleyball Courts
- Tennis Courts
- Gymnastics, wrestling and all other indoor sports floors
- Used in offices and in the floors of shops operating in various areas.
Application Steps
- 1
Surface Preparation
The floor is opened up by milling or shot blasting; dust, oil and loose particles are completely removed.
- 2
Primer
A primer suited to the surface moisture is selected; quartz sand is broadcast onto the fresh primer.
- 3
Intermediate Layers
Depending on the type of system, waterproofing and/or a wearing layer is applied.
- 4
Top Coat
The top coat is applied in the selected colour and left to cure in a dust-free environment.
Which surfaces can the system be applied to?
It is applied to sound, load-bearing floors with sufficient surface tensile strength. The surface moisture must not exceed 4%.
When can it be put into use after application?
It can be opened to light use 24 hours after the top coat application and to full load after 7 days.
Can it be applied over an existing coating?
If the adhesion and strength of the existing coating are sufficient, it can be applied after surface preparation.
The surface moisture must not exceed 4%. At high moisture levels the primer adhesion drops and blistering occurs.
Application must not be carried out without observing the waiting times between coats.
Slight shade variations may occur between different production batches; using a single batch in the same area is recommended.
Products used in the system
The Fox Bau products used in the layers of this system.








