FOX SUPER FINISH is an acrylic-based, ready-to-use multipurpose fine finish and surface levelling material developed for interior applications. It provides an excellent flat surface on plasterboard, plaster and cement-based surfaces prior to painting or wallpapering.
Colour Palette
Packaging
20 kg
Product Description
FOX SUPER FINISH is an acrylic-based, ready-to-use multipurpose fine finish and surface levelling material developed specifically for interior applications. It can be used as a levelling filler on plaster or cement-based rendered surfaces prior to painting and wallpapering, for eliminating joint transitions on plasterboard surfaces, and as a fine finish coat on aerated concrete or brick surfaces. With its high-adhesion structure suitable for different surface quality classes from Q2 to Q4, it is safely used in interior spaces. The product, with a density of 1.67±0.05 g/cm³, does not dust on the surface after drying and can be easily sanded.
Advantages
- Ready to use.
- Suitable for quality levels from Q2 to Q4.
- Easy to apply.
- Easy to sand.
- High adhesion.
- Does not dust on the surface after drying.
Usage Areas
- As a levelling filler on plaster or cement-based render prior to painting or wallpapering
- As a fine finish putty for rendered or plasterboard surfaces
- For surface preparation prior to painting in interior spaces
- For smoothing joint transitions as a fine finish coat over joint tape
- As a fine finish coat on aerated concrete or brick surfaces
Application Steps
- 1
Surface Preparation
The surface to be treated must be free of loose particles and cleared of all residues that could reduce adhesion, such as oil, grease and dirt. Putty or paper residues must be removed from the surface. Plasterboard must be firmly fixed to dry, clean and dust-free substrates, and joints must be ensured to be free of dust.
- 2
Mixing
FOX SUPER FINISH must be mixed with an electric mixer at 400–600 rpm before use.
- 3
Application
FOX SUPER FINISH should be applied to the surface using a plastering knife, wide spatula, scraper or similar tools. The use of plaster joint tape is recommended for joint gaps. When applying multiple coats, the first coat must be allowed to dry completely before applying the next coat. Sanding can be carried out after the surface has dried completely.
- 4
Cleaning of Application Tools
Tools and equipment used after application must be cleaned with water.
Critical
Application should not be carried out below +10°C.
Important
Hot weather shortens the drying time; cold weather extends it.
Important
In thick-layer applications, longer drying times may occur depending on temperature and humidity.
Critical
When applying multiple coats, the first coat must be allowed to dry completely before applying the next coat.
Important
In unopened packaging, the product can be stored for 12 months in a cool, dry place, protected from frost and direct sunlight. The lid of the packaging must be closed airtight immediately after use.
Information
To preserve packaging integrity, pallets must not be stacked on top of each other and should be arranged in a single row. First-in, first-out rules must be observed during shipment.
Critical
It is dangerous to approach storage and application areas with open flame; areas must be ventilated.
Important
During application, appropriate work clothing, protective gloves, goggles and a mask must be worn in accordance with occupational health regulations.
Critical
During storage and application, contact with skin and eyes must be avoided; in case of contact, wash immediately with plenty of water and soap; if swallowed, seek medical attention immediately.
Important
Food and beverages must not be brought into application areas. Store out of reach of children.
Related Products
Similar products to this item
